MED351825CS!001ENG- -  -  N- VABO Composites FRD30 Door -N- S- S- -29/09/2026- Marine Equipment- - SN- S- - N-  - 1,124,914B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED351825CS/001- N-Sep 28, 20311124914
 
Form
  Marine Equipment(TO)
Certification N. MED351825CS/001 - (ENG)
Certificate date 29/09/2026
Type Protezione antincendio
Product Fire doors on high speed craft
Item Nº MED/3.35

Model or Denomin.
Items
VABO Composites FRD30 Door
Applicant Vabo Composites B.V.
Place of requester Randweg 22  %  8304 AS Emmeloord  % NETHERLANDS
Tel. N.,Fax, Email +31 527 685 048, ---, dennis@vabocomposites.com
Directive (EU) 2026/1434
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. X/3,IMO Res. MSC.36(63)-(1994 HSC code) 7,IMO Res. MSC.97(73)-(2000 HSC code) 7.
Request 24/08/2026
Expire date 28/09/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED351825CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/3.35
Description Fire doors on high speed craft
Type VABO Composites FRD30 Door
Applicant Vabo Composites B.V.
Randweg 22,8304 AS Emmeloord,NETHERLANDS
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. X/3; IMO Res. MSC.36(63)-(1994 HSC code) 7; IMO Res. MSC.97(73)-(2000 HSC code) 7.
Issued in Genoa on
This Certificate is valid until
September 29, 2026
September 28, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED351825CS/001
Page 1 of 2

Product description

Single leaf composite hinged door installed in a load-bearing fire resisting 60 bulkhead. The maximum clear opening size of the door is 800 mm wide and 1900 mm high. The door leaf, having maximum width of 852.5 mm and maximum height of 1952.5 mm, has a total thickness of 50 mm. It is composed of a sandwich panel 41 mm thick, composed of two GRP skins having thickness of 3.5 mm (internal and external) with a core of ArmaPET foam 34 mm thick and density of 150 kg/m3. The sandwich is covered, on the side opposite to the hinges, with a layer of Promapaint SC-3 (0.5 mm thick), a layer of cork (4 mm thick) covered glued on both sides by means of Promaseal-S (0.75 mm thick per each side), a layer of MICA (2 mm thick) and a layer of Promapaint SC-3 (0.5 mm thick). The sandwich is covered, on the hinges side, with a layer of Promapaint SC-3 (0.5 mm thick).
The frame is composed of stainless steel profiles 6 mm thick, screwed to the bulkhead by means of 30 M12x50 screws.
Field of application
Fire resisting division 30 Class single leaf hinged door, with the fire hazard on the side opposite to the hinges.
Reference documents
Vabo Composites drawings enclosed to Efectis Nederland Test Laboratory Report No. DOC-ENL-26-000975[Rev.1].
Tests carried out
Tests as per Efectis Nederland Test Laboratory Report No. DOC-ENL-26-000975[Rev.1] issued on 25 September 2026 according to IMO 2010 FTP Code Part 11.




ATTACHMENT TO
CERTIFICATE No. MED351825CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****