1. Production Description:
1.1 Type
CJ85/86, XLPE insulated, copper wire braid outer
/SC or /NSC-VFD sheathed, shipboard power and VFD cable
CJPF86, XLPE insulated, thermoplastic polyolefin (inner/outer)
/SC or /NSC-VFD sheathed, shipboard power and VFD cable
CJPJ85, XLPE insulated, cross-linked polyolefin (inner/outer)
/SC or /NSC-VFD sheathed, shipboard power and VFD cable
Note:
Conductor : Stranded bare or tinned copper in accordance with IEC 60228.
Letter abbreviation:
C: Shipboard power cable
J : XLPE insulation
PJ : Cross-link polyolefin sheath (SHF2)
PF : Thermoplastic polyolefin sheath (SHF1)
VFD: Suitable for variable frequency motor drive
Outer protection and flammability of cable is shown as follows:
+Outer Protection:
85: Copper wire/Tinned copper wires braided with cross-linked polyolefin outer sheathed
86: Copper wire/Tinned copper wires braided with thermoplastic polyolefin outer sheathed
+Flammability Code:
SC: flame retardant, low-smoke & halogen-free type tested to IEC60332-3-22 Cat. A, IEC60754-1/2, IEC61034-1/2
NSC: flame retardant, fire resistant, low-smoke & halogen-free type tested to IEC60332-3-22 Cat. A, IEC60331,
IEC60754-1/2, IEC61034-1/2.
TYPE APPROVAL CERTIFICATE |
No. ELE106524WS/006 |
Enclosure - Page 2 of 2 |
|
1.2 Range
VFD shipboard electric power cables with following rating:
Type | Rated Voltage (KV) | Number of Core | Conductor Cross-Section (mm2) | Max. Temp. (°C) |
/SC,/NSC-VFD
CJ85
CJ86
CJPJ85
CJPF86, | 0.6/1.0 | 3 | 2.5 to 300 | 90 |
3 +E | 2.5 to 300
1.5 to 150 (E) | 90 |
3+3E | 2.5 to 300
1 to 50 (E) | 90 |
/SC,/NSC-VFD
CJ85
CJ86
CJPJ85
CJPF86, | 1.8/3.0 | 3 | 2.5 to 300 | 90 |
3 +E | 2.5 to 300
1.5 to 150 (E) | 90 |
3+3E | 2.5 to 300
1 to 50 (E) | 90 |
Note: "conductor cross-section" is selected from the following series of conductor size:1, 1.5, 2.5, 4, 6, 10, 16, 25, 35,
50, 70, 90, 120, 150, 185, 240, 300 mrn².
2. Reference Documents:
+ Test report signed by attending Surveyor: "Jiangsu Jiangyang Special Cable Co., Ltd" See RINA Drawing No. SHEL-19364.
+ Structure and technical declaration : See RINA Drawing No. SHEL-19360.
+ Asbestos-free Declaration: Filed by RINA with No. SHEL-19363.
3. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
4. Renewal/Revision
+ May 16, 2019: initial certification. Certificate No. ELE114818WS/002 .
+ June 21, 2024: renewed without design change. New certificate No. ELE106524WS/006 revokes previous certificate. |
|