MED435524CSENG- -  -  N- SLIDING A60 SINGLE DOOR - TFRA60P -N- S- S- -13/04/2026- Marine Equipment- - SN- S- - N-  - 1,152,230B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED435524CS- N-Apr 12, 20311152230
 
Form
  Marine Equipment(TO)
Certification N. MED435524CS - (ENG)
Certificate date 13/04/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
SLIDING A60 SINGLE DOOR - TFRA60P
Applicant MBM GROUP S.R.L.
Place of requester Via Rovereto 4  %  31010 Mareno Di Piave (TV)  % ITALY
Tel. N.,Fax, Email 0422 881716, ---, invoice@mbmgroup.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1511/Rev.1
Request 07/10/2024
Expire date 12/04/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED435524CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type SLIDING A60 SINGLE DOOR - TFRA60P
Applicant MBM GROUP S.R.L.
Via Rovereto 4,31010 Mareno Di Piave (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
April 13, 2026
April 12, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED435524CS
Page 1 of 2

Product description

Single leaf sliding door whose minimum clear opening size is 2095 mm (W) and 2600 mm (H) and maximum clear opening size is 5000 mm (W) and 3000 mm (H). The leaf having thickness of 62.4 mm, is composed of two steel sheets, 1.2 mm thick each and, in between, the insulating material. This material is composed of a panel of calcium silicate type PLURATECT MARINE LIGHT 12.5 mm thick and density of 500 kg/m3, a layer of mineral wool type ROCKWOOL SEAROX SL 440-490 35 mm thick and density of 180 kg/m3 and a panel of calcium silicate type PLURATECT MARINE LIGHT 12.5 mm thick and density of 500 kg/m3. This material is glued to the steel sheet by means of 250 g/m2 of adhesive type ISOCOLL 8810 FLR. The leaf is equipped with longitudinal stiffeners, composed of bended edge of steel sheets of 1.2 mm in each side with pitch of 1024 mm and 1412 from the edge of leaf. The door frame is composed of a C steel profile having dimensions of 37x84x3 mm on the upper side and the vertical side coupling of a L stell profile having dimensions of 113x40x5 mm. On the lock-side the frame is composed of a rectangular shaped profile of dimensions 80x60 fixed to a L profile having dimension of 190x40x5 mm fillet welded to the bulkhead. Between frame and L profiles a thermo-expanding gasket type MARVON 20x1 mm is fitted. On the upper side is welded to the bulkhead a rail support of the suspension trolley, while on the lower side the sill is composed of C profile 60x20x3 mm welded to a L profile 188x30x5 mm. The door frame is provided with an insulating strips pf Dictator DS stop fire FCM having thickness of 2 mm. The upper, lower and side opposite to the lock are provided vent holes having diameters of 12 mm and a pitch of 300 mm. The door is provided by four guide pin having diameters of 12 mm.

The Door may also be produced by:
MBM GROUP SRL Via Rovereto, 4 31010 Mareno di Piave (TV)
Field of application
Fire resistant A-60 Class single leaf sliding door.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows.
- maximum door size tested
- door used with a fire tested frame design.
Reference documents
OFFICINE DEL BELLO drawing: No. 5460 "SINGLE A60 SLIDING DOOR" Rev. 02 dated 25 November 2022 and No. 5461 "SINGLE A60 SLIDING DOOR" Rev. 02 dated 17 Octobery 2023 enclosed respectively on Test Reports N.2022CS011340/5 and N.2022CS011340/7; and drawing No. 2024CS014355 rev. 2 dated 13/04/2026
Tests carried out
Tests as per RINA Test Laboratory report N.2022CS011340/5 dated 5 December 2022 and N.2022CS011340/7 dated 27 October 2023 issued according to Part 3 of IMO 2010 FTP Code, and 2024CS014355 rev.1 dated 05/06/2025




ATTACHMENT TO
CERTIFICATE No. MED435524CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****