MED160224CS!001ENGBN
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo di qualità
Module: B
Certification N. MED160224CS/001
Certificate date
Type Protezione antincendio
Product Fixed oxygen analysis and gas detection equipment: (a) category 4 - safe area
Item Nº MED/3.54a
Model or Denomin. Sensors RTC 1001 - RTC 1002
Applicant RECOM INDUSTRIALE S.R.L.
Place of requester VIA PIETRO CHIESA 25 R  %  16149 GENOVA (GE)  % ITALY
Tel. N.,Fax, Email 010 4695661, 010 6424205, ---
Directive (EU) 2023/1667
Dati Certificato D o E
Certification N. MED041325GE/001
Certificate date 10/03/2025
   

Michele Fusco S


PRODUCTION QUALITY ASSURANCE (MODULE D)
CERTIFICATE No.  MED041325GE/001

This is to certify that
RINA Services S.p.A. did undertake the relevant assessment procedures for the quality system of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2024/1975, for the products described in the EC Type Examination Certificates (Module B) listed in the Attachment to this Certificate.
MED Item Nº MED/3.54a
Description Fixed oxygen analysis and gas detection equipment: (a) category 4 - safe area
Type Sensors RTC 1001 - RTC 1002
Applicant RECOM INDUSTRIALE S.R.L.
VIA PIETRO CHIESA 25 R,16149 GENOVA (GE),ITALY
Module B certificate Number  MED160224CS/001
Date  Jun 3, 2024 
Date   RINA (No. 0474)
    
Issued in RINA Genoa Marine on
This Certificate is valid until
March 10, 2025
March 9, 2028

This Certificate consists of this sheet plus an attachment
This certificate, in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE of the equipment listed in the Attachment, authorises the Manufacturer or his authorised representative established within the Community to affix the "Mark of Conformity" (wheelmark) as reported below.
0474 /YY
YY Last two digits of year mark affixed

________________________________________
Michele Fusco
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No. MED041325GE/001
Equipment:
Sensors RTC 1001 - RTC 1002
Technical documentation

____________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules
e) RINA may revoke the approval in the case of modifications to requirements or conditions for the approval
f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply.
g) This certificate loses its validity in case the EC type Examination (Module B) certificate is no more valid.
__________________________________
Michele Fusco

**** NOTICE: This is NOT an official certificate ****