System Overview
Viscochief 3
is a monitoring and control system intended for automatic fuel oil viscosity control.
It is a PLC based system allowing I/O modules expansion, able to satisfy different tasks;
Three different remote monitoring Systems are foreseen: a remote HMI touch panel, by modbus or by hardwired.
Viscochief 3 mainly consists of a control cabinet for driving heating controls comparing actual viscosity or temperature with a set value.
Actual Viscosity is detected through a viscosity sensor while the actual temperature through a Resistance Temperature Detector PT100 Type.
Target viscosity or temperature are input by the operators through a set of parameters.
Viscochief 3 system mainly consists of:
| PLC Modules, HMI panel | Brand | Type |
| Power panel T50. Display and Capacitive touch screen 7" 800x480 WQVGA. Landscope and protrait format. | B&R | 6PPT50.0702-16B |
| Power panel T30. Display and Capacitive touch screen 4.3" 480x272 WVGA. Landscope format. | B&R | 6PPT30.043F-20B |
| Compact-S CPU Module processor and comm. interfaces (Ethernet Isol. from Power link and from PLC) | B&R | X20CP0482 |
| Power supply module (X20 compact-S CPU); RS232 115 kbit/sec and CAN bus 1 Mbit/s; In/Out 24 Vdc | B&R | X20PS9602 |
| Digital Output module Source connection 24Vdc_12Ch. (Isolated. Ch. from bus) | B&R | X20DO9322 |
| Digital Input module Sink connection 24Vdc_12Ch. (Isolated. Ch. from bus) | B&R | X20DIF371 |
| Analog Input temperature module _ 2 Ch., 3 wires connection PT100 and PT1000 (Isolated. Ch. from bus) | B&R | X20AT2222 |
| Analog Output module _ 2 Ch., 16 bit res. Config 4-20, 0-20, 0-24 mA (Isol Ch./ Ch. and Ch./ bus) | B&R | X20AO2437 |
| Analog Output module _ 2 Ch., 16 bit res. Config 4-20, 0-20, 0-24 mA (Isol Ch./ bus) | B&R | X20AO2622 |
| Analog Input module _ 2 Ch., 13 bit res. Config ±10V or 0-20mA, 4-20mA (Isolated. Ch. from bus) | B&R | X20AI2622 |
| Communication module 1 x RS485/RS422 transfer rate115.2 kbit/s (Isolated.from bus and I/O supply) | B&R | X20CS1030 |
| Digital Input module Sink connection 24Vdc_2Ch., three Wires connection (Isolated. Ch. from bus) | B&R | X20DI2377 |
| Digital Output module Source connection 24Vdc_6Ch., two Wires connection (Isolated. Ch. from bus) | B&R | X20DO6322 |
| Digital Output Module, 4 outputs, 24Vdc, 0,5A, source, 3 wire connection (Isolated. Ch. from bus) | B&R | X20DO4322 |
| Digital Input module Sink connection 24Vdc_6Ch., two Wires connection (Isolated. Ch. from bus) | B&R | X20DI6371 |
| Digital Output Module, 6 outputs, 30VDC/0.5A, 115VAC/1A, (Isolated. Ch. from bus & channel) | B&R | X20DO6529 |
|
|
|
| Viscosity circuit board (processing viscosity and temperature signal); Input 220 Vac Power Supply | VAF | 0879-1011 (EVT30D) |
| Viscosity circuit board (processing viscosity and temperature signal); Input 220 Vac Power Supply | VAF | 0879-1010 (EVT30) |
Specification
Viscochief 3 system diagram and component list n. 9048624;
Viscochief 3 system diagram and component list n.9048624;
Viscochief 3 System description (07/2021)
Viscochief 3 FMECA (06.07.2020); Flow Charts Document no (from 9053223 to 9053228);
Wiring Diagram 9053494 (rev.2) & 9053495 (rev.2)
Power Panel T50 User's manual Ver.2.1 - Power Panel T30 User's manual Ver.1.43 (December 2019) -
Software quality assurance plan _ Software review _ doc. ADSQAP-1-21 (2020.10.08)
System quality assurance plan_doc. ADSQAP-1-41 (2016.10.17)
VAF Technical Manual TIB-775-GB-0418(2);
VAF Technical Manual TIB-778-GB-0418(2); Dwg 9013712
Test reports:
NEMKO report n. 431378-1 TRFEMC (2021.03.22); NEMKO report n. 431378-1 TRFEnvEx (2021.07.26);
NEMKO report n. 431378-2 TRFEMC (2021.03.22); NEMKO report n. 431378-2 TRFEnvEx (2021.03.22);
NEMKO report n. 431378-3 TRFEnvEx (2021.07.26); NEMKO report n. 431378-4 TRFEnvEx (2021.08.01);
ALFALAVAL n.51491556-1 Test. Specification ver.7 (ver. 16/07/2021);
CENTROTECNICA Report n. VR2121201NKCN issue 0 (2021.04.21)
Notes:
General
For each installation on board specific System Flow-Chart and wiring diagrams describing the as-built functonalities to be sent for approval.
Unmanned machinery space Ship Notation:
Viscochief 3 to be provided with Alarm System and Safety System independent from viscosity control System, so that in case the automatic viscosity or temperature control system fails an alarm is given in the manned control stations:controls must be manually taken at the local machinery platform. |
|