MED240924WS!001ENGF- -  -  N- RZ25 -N- S- S- -23/02/2025- Marine Equipment- - SN- S- - N-  - 201,826B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED240924WS/001- N-Feb 23, 2030201826
 
Form
  Marine Equipment(TO)
Certification N. MED240924WS/001 - (ENG)
Certificate date 23/02/2025
Description
Winches for survival craft and rescue boats,(c) liferafts,(d) rescue boats
Type Mezzi di salvataggio
Product Winches for survival craft and rescue boats: (c) liferafts
Item Nº MED/1.41c,MED/1.41d

Model or Denomin.
Items
RZ25
Applicant FASSMER-MARLAND INT'L LTD.
Place of requester No.23, Hemin Road, Cuiheng New District  %  528437 Zhongshan (Guangdong)  % CHINA
Tel. N.,Fax, Email ---,+86 18319951964, johnny@fassmer-marland.com
Directive (EU) 2024/1975
Standards IMO Res. MSC 81(70) as amended
Reference Documents Reg. III/4, III/16,III/17 III/23, III/24, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Expire date 23/02/2030
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED240924WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.41c,MED/1.41d
Description Winches for survival craft and rescue boats,(c) liferafts,(d) rescue boats
Type RZ25
Applicant FASSMER-MARLAND INT'L LTD.
No.23, Hemin Road, Cuiheng New District,528437 Zhongshan (Guangdong),CHINA
Testing standards IMO Res. MSC 81(70) as amended
Reference standards Reg. III/4, III/16,III/17 III/23, III/24, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in SHANGHAI on
This Certificate is valid until
February 24, 2025
February 23, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED240924WS/001
Page 1 of 2
TECHNICAL DATA

Product Description:
- Winch type RZ25 is suitable to be used in combination with davit for life rafts/rescue boats.
- Maximum Working Load: 25 kN
- Maximum Hoisting Load: 14 kN
- Minimum Launching Load: 5 kN
- Winch shall be positioned on board in order that if H is the height (m) from the davit head to the waterline (ship at lightest sea-going condition), the lowering speed (with MWL) to the water shall be not less than (0.4+0.02H).
- Winch RZ25 is equipped with electric motor.
- Winch shall be installed with davit that are in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST-51176 and relevant test report.

REFERENCE DOCUMENTS

Dwg. no. Title


SHST-51176 FSAR25 DAVIT & RZ25 WINCH

TESTS CARRIED OUT

Tests have been carried out on 2/January/2025.





ATTACHMENT TO
CERTIFICATE No. MED240924WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****