DIP001326CSBIL- -  -  N- PORTELLO STAGNO A PONTE -N- S- S- -09/03/2026- Prodotti per nautica diporto- - NN- N- Stefano Moscatelli- N-  - 422,493Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP001326CS- N-Mar 8, 2029422493
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP001326CS - (BIL)
Certificate date 09/03/2026
Product Boccaportelli stagni

Model or Denomin.
Items
PORTELLO STAGNO A PONTE
FLUSH DECK WATERTIGHT HATCH
Applicant NEMO INDUSTRIE SPA
Place of requester VIA TOGLIATTI, 1555  %  47025 Cella Di Mercato Saraceno (FC)  % ITALY
Tel. N.,Fax, Email 0547 96567, 0547 96526, e.sternini@nemoindustrie.com
Directive NONE
Standards RINA rules for the Classification of Yachts
Expire date 08/03/2029
Head Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP001326CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Boccaportelli stagni
Description Watertight hatches
Tipo PORTELLO STAGNO A PONTE
Type FLUSH DECK WATERTIGHT HATCH
Norme di riferimento RINA rules for the Classification of Yachts
Reference standards RINA rules for the Classification of Yachts








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a VIAREGGIO il 9  Marzo  2026.  Questo Certificato è valido fino al 8 Marzo 2029
   
Issued in VIAREGGIO  on March 9, 2026. This Certificate is valid until March 8, 2029
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP001326CS
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
PORTELLO STAGNO A PONTE
Documenti di riferimento:
- Pratica n° RS/2026/CS/01/13
Reference documents:
- Job nr. RS/2026/CS/01/13

Descrizione Prodotto:
Product Description:
- Portello stagno a ponte in alluminio.
Flush deck watertight aluminium hatch.
- Vedere disegno approvato con n° DIP/142737.
See drawing approved with nr. DIP/142737.
- Dopo l'installazione a bordo, deve essere eseguita prova di spingardatura.
After installation on board, a water jet test is to be carried out.
- L'omologazione è riferita alla sola "tenuta stagna a battente".
The T.A. is relevant only to "watertightness".
- Portello idoneo per un battente di pressione idraulica pari a 1.4 m.
Hatch suitables for an hydraulic pressure of 1.4 m water head.
- Portelli installati su percorsi di sfuggita dovranno essere apribili da entrambi i lati (le maniglie dovranno esser permanentemente fissate).
Hatches fitted on escape ways are to be openable by both sides (handles are to be permanently fixed).
Campi di applicazione:
- Portelli stagni a battente per "RINA Rules for the Classification of Yachts".
Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts".


  
 Viareggio March 09, 2026
**** NOTICE: This is NOT an official certificate ****