MED190523WS!001ENGF- -  -  N- WLT/L50 -N- S- S- -30/08/2023- Marine Equipment- - SN- S- - N-  - 201,826B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED190523WS/001- N-Aug 29, 2028201826
 
Form
  Marine Equipment(TO)
MED499423WS/001,MED499423WS/002,MED499423WS/003,MED499423WS/004
Certification N. MED190523WS/001 - (ENG)
Certificate date 30/08/2023
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
WLT/L50
Applicant SHEYANG VICTOR MARINE AUXILIARIES CO., LTD.
Place of requester NO. 9, HEDE ROAD, HEDE INDUSTRY GARDEN, SHEYANG, JIANGSU, CHINA
Tel. N.,Fax, Email +86 13960266399, ---, WLT8888@163.com
Directive (EU) 2022/1157
Standards IMO Res.MSC 81(70) as amended
Reference Documents SOLAS '74 Convention, as amended - Regulation III/4, III/23, III/33, III/34 (as applicable) IMO Resolution MSC.48(66) - LSA Code, as amended. IMO MSC.1/Circ.1632.
Expire date 29/08/2028
Head Office SHANG HAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED190523WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type WLT/L50
Applicant SHEYANG VICTOR MARINE AUXILIARIES CO., LTD.
NO. 9, HEDE ROAD, HEDE INDUSTRY GARDEN, SHEYANG, JIANGSU, CHINA
Testing standards IMO Res.MSC 81(70) as amended
Reference standards SOLAS '74 Convention, as amended - Regulation III/4, III/23, III/33, III/34 (as applicable) IMO Resolution MSC.48(66) - LSA Code, as amended. IMO MSC.1/Circ.1632.
Issued in SHANG HAI on
This Certificate is valid until
August 30, 2023
August 29, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED190523WS/001
Page 1 of 2

TECHNICAL DATA


Product Description:
- Maximum Working Load: 50 kN
- Maximum Hoisting Load: 30 kN
- Minimum Launching Load: 20 kN
- Arrangement/positioning of launching appliance on board of ship shall be in compliance
with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawings and relevant test report.

REFERENCE DOCUMENTS
Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-46525 WLT/L50 50kN Gravity Luffing Arm Davit (SHST/2023/502/LEIGU), SHST-47654 Test Report for WLT/L50 Gravity Luffing Arm Davit (SHST/2023/945/LEIGU), SHST-46526 Application form/ SHST-46591 Analysis and assessment of risk.

TEST CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, as per test report filed with SHST-47654.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.

Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.





ATTACHMENT TO
CERTIFICATE No. MED190523WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****