ENGGN08/02/2014
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED065909XT/001
Certificate date 2/8/14
Type Protezione antincendio
Directive 2012/32/EU
Product Inert gas systems components
Item Nº A.1/3.42
Model Generon IGS Inc. Membrane HPMB-6816 with dryer
Identification MM076124
Applicant GAS AND HEAT S.P.A.
Place of requester VIA TRE NOVEMBRE 8  %  57123 LIVORNO (LI)  % ITALY
Tel. N.,Fax, Email 050 316611, 050 988526, info@gasandheat.it
Standards Chapter II-2 of Solas '74 as amended
Notes Issued subsequent to test carried out on 04/05/2008, Test Certificate 2008/XL/01-194
Head Office ISTANBUL



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED065909XT/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/3.42
Description Inert gas systems components
Model Generon IGS Inc. Membrane HPMB-6816 with dryer
Identification MM076124
Applicant GAS AND HEAT S.P.A.
VIA TRE NOVEMBRE 8
57123 LIVORNO (LI)
ITALY
Testing standards Chapter II-2 of Solas '74 as amended
    
Issued at Yalova 
on February 8, 2014

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /14
 

________________________________________
RINA Services S.p.A. - Volkan Kocyigit
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED065909XT/001

Verified components of the equipment (with serial number)
MM076124
Technical documentation
Manufacturer:     GENERON IGS Inc.
Model:     Membrane Model HPMB-6816 with dryer
Test Certificate No:     2008/XL/01-194  (13/10/2008)

Limitation on the acceptance or use of the product
-
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Volkan Kocyigit
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****