MED153525CS!002ENGD- -  -  N- Metallic pipe deck penetration -N- S- S- -31/03/2025- Marine Equipment- - SN- S- - N-  - 1,136,178B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED153525CS/002- N-Jun 26, 20281136178
 
Form
  Marine Equipment(TO)
Certification N. MED153525CS/002 - (ENG)
Certificate date 31/03/2025
Type Protezione antincendio
Product Penetrations through "A" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Item Nº MED/3.26b
USCG Category N° 164.138

Model or Denomin.
Items
Metallic pipe deck penetration
SERIE TURBO; SERIE FRABOPRESS
Applicant RUBINETTERIE BRESCIANE BONOMI SPA
Place of requester via. M. Bonomi, 1  %  25064 Gussago (BS)  % ITALY
Tel. N.,Fax, Email +39 030 82 50 224, ---, chiara.prandelli@rubinetteriebresciane.it
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code) as amended - IMO MSC.1/Circ. 1488
Reference Documents SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1276 Rev.1, IMO Res. MSC.1/Circ.1655.
Request 25/03/2025
Expire date 26/06/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED153525CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.26b
USCG Category Nº 164.138
Description Penetrations through "A" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Type Metallic pipe deck penetration
SERIE TURBO; SERIE FRABOPRESS
Applicant RUBINETTERIE BRESCIANE BONOMI SPA
via. M. Bonomi, 1,25064 Gussago (BS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) as amended - IMO MSC.1/Circ. 1488
Reference standards SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1276 Rev.1, IMO Res. MSC.1/Circ.1655.
Issued in Genoa on
This Certificate is valid until
March 31, 2025
June 26, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED153525CS/002
Page 1 of 3


Product description


Metallic pipe transits composed of a stainless steel body hexagonal or octagonal shaped, fitted with a threaded coaming passing through the deck plate. On the other side a stainless steel body, hexagonal or octagonal shaped, is screwed to the coaming. The two bodies are fitted, inside, with graphite gaskets. The pipes are fitted through the coaming and fillet welded to the same on both sides. The penetrations may be insulated on both sides by means of mineral wool (certified non combustible in conformity to the requirements of the IMO FTP Code) having thickness of 30 mm and density of 36 kg/m3 or thickness of 70 mm and density of 56 kg/m3 whereas the pipes are insulated by means of mineral wool cylinders having thickness of 50 mm and density of 62 kg/m3.

The product may also be produced by:
  • Chibro S.r.l. - Via Valtellina 15, Montano Lucino (CO) - Italy
  • Rubinetterie Bresciane Bonomi S.p.A. - Via Circonvallazione 7, Bordolano (CR) - Italy


Reference documents

Rubinetterie Bresciane drawings No. R1809A-SKE001 Rev. B dated 8 June 2018, No. R1809A-ASS001 dated 1 February 2018 and No. R1809A-ASS010 dated 1 February 2018 approved on 28 June 2018 and on 13 February 2018 respectively with endorsement No. LABS-1664, LABS-1606 and LABS-1607.



Tests carried out

Tests as per RINA Test Laboratory Reports No. 2017CS01973/2 dated 16 January 2018 and No. 2018CS011358 dated 28 June 2018 issued according to Appendix 1 of IMO 2010 FTPC Part 3 - A.III Pipe and Duct Penetrations.




 



ATTACHMENT TO
CERTIFICATE Nr. MED153525CS/002
Page 2 of 3
Field of application
Fire resistant metallic pipe penetrations through steel decks as per following tables:
A-60 CLASS
Transit dimensions (mm)
Pipe diameter (mm)
Asimmetrical insulation on both sides
Simmentrical insulation on both sides
from 76 up to 180
from 15 up to 108
Unexposed side - one layer having density of 56 kg/m3 and one layer having density of 36 kg/m3, 320x320 mm
Exposed side - one layer having density of 56 kg/m3, 320x320 mm; on the pipe, starting from the deck, a cylinder having density of 62 kg/m3 and length of 600 mm
One layer having density of 56 kg/m3, 320x320 mm; on the pipe, a cylinder having density of 62 kg/m3 and length of of 260 mm
or
Two layers having density of 36 kg/m3, 320x320 mm; on the pipe, a cylinder having density of 62 kg/m3 and length of 200 mm

A-30 CLASS
Transit dimensions (mm)
Pipe diameter (mm)
Asimmetrical insulation on both sides
from 76 up to 180
from 15 up to 108
Unexposed side - one layer having density of 56 kg/m3, 320x320 mm
Exposed side - one layer having density of 56 kg/m3, 320x320 mm; on the pipe, starting from the deck, a cylinder having density of 62 kg/m3 and length of 600 mm

A-0 CLASS
Transit dimensions (mm)
Pipe diameter (mm)
Insulation
from 76 up to 180
from 15 up to 108
-




ATTACHMENT TO
CERTIFICATE No. MED153525CS/002
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****