ELE526725CSENG- -  -  N- EDC17CV41  -N- S- S- -02/03/2026- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 2,378,979Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE526725CS- N-Mar 9, 20312378979
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE526725CS - (ENG)
Certificate date 02/03/2026
Type Impianti di Automazione
Product Unità controllo motore

Model or Denomin.
Items
EDC17CV41
Applicant FPT INDUSTRIAL S.P.A.
Place of requester VIA PUGLIA, 15  %  10156 Torino (TO)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
Expire date 09/03/2031
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE526725CS
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Diesel engine control unit
Type EDC17CV41
Applicant FPT INDUSTRIAL S.P.A.
VIA PUGLIA, 15
10156 Torino (TO)
ITALY
Reference standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
  

 
 
   .   This Certificate is valid until March 9, 2031
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE526725CS
Enclosure - Page 1 of 1
EDC17CV41
Description:

The EDC17CV41 is a diesel Engine Control Unit (ECU) from the Bosch EDC17 family, used by FPT Industrial in heavy‑duty and marine applications.
It monitors key engine parameters through dedicated sensors (speed, boost pressure, temperature, supply voltage) and controls fuel injection by driving the injector solenoids.
The EDC17 platform has been widely adopted for years by FPT and other engine manufacturers, demonstrating high field reliability and compliance with marine and industrial standards.


Technical description:


Section
Category
Description
Main Functions
Engine monitoring
Reads engine speed (CAM/CRANK), boost pressure, boost temperature, supply voltage and other analog/resistive inputs.

Injection control
Drives injector solenoids directly to achieve the requested engine speed and torque.

Communication
Supports CAN bus SAE J1939 for both data monitoring and speed request (TSC1).

Diagnostic & alarms
Generates alarms (e.g., overspeed, sensor deviation, CAN failures) and communicates diagnostic events to external displays.

Safety logic
Implements overspeed shutdown by disabling injector control; requires key cycle and speed reset for reactivation.
Hardware Description
Physical characteristics
Dimensions: 218 × 260 × 75 mm. Weight: 1.9 kg. Aluminum housing suitable for engine‑room installation.

Mounting
8 × M6 screws, tightening torque 10 ± 2 Nm. Harness must be mechanically supported within 150 mm.

Electronic design
Single‑board PCB with integrated protections (affecting insulation/HV test procedures).

Electrical interfaces
24 V power supply, Key +15 input, CAN 2.0B J1939, speed sensor inputs (CAM & CRANK), analog sensor inputs (NTC, ratiometric), injector driver outputs.

Test compatibility
Works with DZS01 speed simulator, UNS10191 monitoring panel, and UNS10185/SCS speed command module for functional and EMC testing.



Technical documentation
214084-2017-AQ-ITA-ACCREDIA - ISO 9001:2015

Test reports:
TesLab Test Report No. 25C368F (02/02/2026)
FPT BOSCH EDC17 NOTES FOR RINA TYPE APPROVAL 260112 (12/01/2026)







Reference document:
Offer No. 2025/34368 accepted on 20/11/2025
Tao App countersigned on 16/10/2025
The documents above mentioned have been archived in the Leonardo Draw Plus portal under the project:
https://leodrawplus.rina.org/projects/73025/detail.


Genoa February 10, 2026
**** NOTICE: This is NOT an official certificate ****