MED245324CSENGD- -  -  N- DX0DM - DX4DM -N- S- S- -01/07/2024- Marine Equipment- - SN- S- - N-  - 1,152,230B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED245324CS- N-Jun 30, 20291152230
 
Form
  Marine Equipment(TO)
Certification N. MED245324CS - (ENG)
Certificate date 01/07/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
DX0DM - DX4DM
Applicant MBM GROUP S.R.L.
Place of requester Via Rovereto 4  %  31010 Mareno Di Piave (TV)  % ITALY
Tel. N.,Fax, Email 0422 881716, ---, invoice@mbmgroup.it
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 23/05/2024
Expire date 30/06/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED245324CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type DX0DM - DX4DM
Applicant MBM GROUP S.R.L.
Via Rovereto 4,31010 Mareno Di Piave (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 1, 2024
June 30, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED245324CS
Page 1 of 2

Product description

Double leaf hinged door having maximum clear opening size of 2050 mm in width and 2150 mm in height. Each leaf is fixed to the frame by means of four hinges. The door leaves, having thickness of 41.6 mm, are composed of two steel sheets, 0.8 mm thick each and, in between, one layer of mineral wool having thickness of 40 mm and density of 150 kg/m3. The mineral wool layer is glued to the steel sheets by means of 250 g/m2 of adhesive type DUNAPOL AD 1670 or UNICOLL type ISOCOLL 8810 FLR. The door frame is composed of an hollow carbon steel profile having thickness of 1.5 mm filled with mineral wool having density of 150 kg/m3. Each leaf may be fitted with a rectangular window having maximum clear opening size of 270 mm in width and 370 mm in height; the glass pane, named PYROSTOP 30-10 (manufacturer Pilkington), having thickness of 15 mm, is composed of 4 glass panes, 3 mm thick each and, in between, 3 thermoexpanding gel layers having, 1 mm thick each. The glass frame is composed of S shaped carbon steel profiles having thickness of 1.5 mm fixed to the leaf by means of screws fitted with pitch of 180 mm in the vertical direction and 240 mm in the horizontal direction. Between the glass faces and edges and the frame, a gasket composed of glass fiber cloth type GLASTEX VR018, is fitted. All rebates, between leaves and between leaf and frame, are fitted with an intumescing gasket, having thickness of 2 mm, named TECNOFLAME.

The Door may also be produced by:
MBM GROUP SRL Via Rovereto, 4 31010 Mareno di Piave (TV)
Field of application
Fire resistant B-15 Class door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
Officine del Bello MBM drawing No. 2014/Porta DX0DM-DX4DM rev. 02 dated 6 June 2019 approved on 07 November 2019 with endorsement No. LABS-1927.
Tests carried out
Tests as per RINA Test Laboratory report No. 2013CS011794/1 issued on 30 June 2014 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED245324CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****