MED286323WSENGB- -  -  N- PN45RC -N- S- S- -06/07/2023- Marine Equipment- - SN- S- - N-  - 1,031,703B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED286323WS- N-Jul 5, 20281031703
 
Form
  Marine Equipment(TO)
MED286323WS
Certification N. MED286323WS - (ENG)
Certificate date 06/07/2023
Type Mezzi di salvataggio
Product Battelli di emergenza rigidi
Item Nº MED/1.18

Model or Denomin.
Items
PN45RC
Applicant Palfinger Marine Europe B.V.
Place of requester Havenstraat 18  %  3115 HD Schiedam  % NETHERLANDS
Tel. N.,Fax, Email +31 88 264 0000, ---, service.netherlands@palfingermarine.com
Directive (EU) 2022/1157
Standards IMO Res. MSC 81(70) as amended,IMO MSC/Circ.1006
Reference Documents SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) V, IMO Res.MSC.97(73)-(2000 HSC Code) 8. IMO MSC.1/Circ.1631.
Request 2023/03/07
Expire date 05/07/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED286323WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.18
Description Rigid rescue boats
Type PN45RC
Applicant Palfinger Marine Europe B.V.
Havenstraat 18,3115 HD Schiedam,NETHERLANDS
Testing standards IMO Res. MSC 81(70) as amended,IMO MSC/Circ.1006
Reference standards SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) V, IMO Res.MSC.97(73)-(2000 HSC Code) 8. IMO MSC.1/Circ.1631.
Issued in SHANGHAI on
This Certificate is valid until
July 6, 2023
July 5, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED286323WS
Page 1 of 3

Product Description


4.50 Meters Rigid Rescue Boat (Type: PN45RC) has a rigid hull made by fiberglass reinforced plastic and filled with polyurethane foam among seats, hulls to provide buoyancy.

Main Characteristics:


- Length Overall: 4.80 meters; - Length of Hull: 4.50 meters;
- Breadth of Hull: 2.00 meters; - Molded Depth: 0.85 meter.

Proposed Propulsion System, In-board Diesel Engine and Propellers of following types:


- Model 380J-3, Manufactured by Zhenjiang Siyang Diesel Engine Manufacturing Co,.Ltd, Power 20.6 KW, Propeller Dimension: D400 x H420;
- Model BUKH DV24RME, Manufactured by BUKH A/S, Power 17.6 KW, Propeller Dimension: D400 x H350;
- Model 3YM27A, Manufactured by Yanmar Co., Ltd, Power 19.4 KW, Propeller Dimension: D400 x H320.

Weight of the boat:

PN45RC
Light Weight with engine and equipment
Fully Equipped with 6 Persons
82.5 Kg/Person
1100 Kg
1595 Kg
100 Kg/Person
1100 Kg
1700 Kg

Hull Material: GRP.
Color: Orange hull
- Gel Coat Resin, type: GE693259H, Manufactured by Ashland (Changzhou) Specialty Chemical Co., Ltd;
- Polyester Resin, type: FL-918, Manufactured by Jiangsu Fullmark Chemicals Co., Ltd;
- Chopped Strand Mat, type: EMC300 & EMC600, Manufactured by Taishan Fiber Glass INC.;
- Glass Fiber Woven Roving, type: EWR800 & EWR400, Manufactured by Taishan Fiber Glass INC.
[Lamination Description: Gelcoat+EMC300+EMC300+EWR400+EMC300+EWR800+EMC300]

Buoyant Material: Polyurethane Foam

Lifting Arrangement:


- 4 Points Lifting Slings fixed to No. 4 eye plates. Or,
- One Off-Load Release Hook Device, Type: NPT30HK, SWL: 3.0 T, Manufactured by Jiangyin Neptune Marine Appliance Co., Ltd.

Righting System: Self-righting

Fuel Tank Capacity for engine: 40 Liters

Speed: ≥6 knots.

Towing Force / Bollard Pull :


- 2.8 KN (380J-3,);
- 2.6 KN (BUKH DV24RME);
- 2.5 KN (3YM27A)

ATTACHMENT TO
CERTIFICATE No. MED286323WS
Page 2 of 3

Application

Maximum number of persons: 6 (No.5 Seated and No.1 on the Stretcher)

Design Assessment

The design assessment is based on IMO Res.MSC 48(66) as amended by IMO Res. MSC.207(81), IMO Res. MSC.218(82), IMO Res. MSC.272(85) and IMO Res. MSC.320(89).

Rescue boat equipment and marking/instructions to be inspected after installation onboard the ship. Equipment shall comply with LSA Code and IMO Res. MSC.81(70).

Production and installation testing shall be carried out according to IMO Res. MSC. 81(70), part 2.


Tests Carried Out

The Rescue Boat was tested as per :
- Test Report (Test for FRP Specimen) (Ref No.: 2018-03-022) issued by Shanghai R&D Center of Polymer Material and filed by RINA with No.: SHFP-22740;
- Test Report of Fire-retardant Materials (Ref No.: 2018-03-012-1) issued by Shanghai R&D Center of Polymer Material in accordance to MSC/Circ.1006 and filed by RINA with No.: SHFP -22741;
- Evaluation and Test Report issued by RINA on 21 June 2023 in accordance with Recommendation on testing of Lifesaving Appliances, IMO Res. MSC.81(70) part 1, as amended by IMO Res. MSC.226(82), IMO Res. MSC.274(85) and IMO Res. MSC.321(89) and LSA Code as amended by Res. MSC.218(82) and Res. MSC.320(89) etc, and filed by RINA with No.: SHFP-23861.

Reference Documents

Technical drawings and manuals approved and filed by RINA listed on Approval letter No.: SHFP/2022/563/SQN & SHFP/2023/134/SQN.




ATTACHMENT TO
CERTIFICATE No. MED286323WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****