FAB243426XGENG- -  -  N- Raw blocks made from ingot and continuous casting -N- S- S- -06/07/2026- Fabbricanti Approvati- - NN- N- - S-  - 2,389,065BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB243426XG- N-Jul 5, 20312389065
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB243426XG - (ENG)
Certificate date 06/07/2026
Type Approvazione di fabbricanti di materiali
Product Carbon, Carbon-Manganese and Alloy Steels

Model or Denomin.
Items
Raw blocks made from ingot and continuous casting
Applicant Stahlwerk Bous
Place of requester Saarstraße 1  %  66359 Bous  % GERMANY
Tel. N.,Fax, Email ---, ---, invoice.bous@gmh-gruppe.de
Standards RINA Rules for the approval of manufacturers of materials
Expire date 05/07/2031
Responsible Office HAMBURG
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB243426XG
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Carbon, Carbon-Manganese and Alloy Steels
Type Raw blocks made from ingot and continuous casting
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until July 5, 2031
_________________________________
RINA Services S.p.A.
Matthias Steinbusch

M. Steinbusch

This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB243426XG
Enclosure - Page 1 of 1
Raw blocks made from ingot and continuous casting
APPROVAL CONDITIONS


Rolled semifinished products

Material
Product
Making
Max dimension [mm]
Max weight
[kg]
Carbon and Carbon-Manganese
Ingot
EAF, IC

60.000
Billet, Slab, Bloom
EAF, CC
500

Alloy
Ingot
EAF, IC

60.000
Billet, Slab, Bloom
EAF, CC
500

Additional Remarks

- Ingots up to 60.000kg and 2300mm diameter
- Maximum dimensions for rectangular cross-section are 430mm x 320mm and 500mm diameter.




General conditions for the approval

- The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of
materials are complied with in all respects.


- RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect

the validity of this certificate.

HAMBURG July 6, 2026
**** NOTICE: This is NOT an official certificate ****