Product specification:
Fomtec Enviro Sea 1% is a firefighting foam concentrate with no intentionally added PFAS (fluorine compounds).
It is a novel formulation consisting of surfactants, foam stabilizers, and boosters. Fomtec Enviro SEA 1% is intended for use on hydrocarbon fuel fires such as oil, diesel, and other water-immiscible fuels. Fomtec Enviro SEA 1% is specially designed for use in marine applications and for use with seawater.
Technical Characteristics
FOAM CONCENTRATE Fomtec Enviro Sea 1% |
| Mixing Ratio | 1 | % |
| Specific Gravity at 20ºC | 1,075 ± 0,01 | g/ml |
| Viscosity at 20ºC | <50 | mPas |
| PH at 20ºC | 6,5-9,5 | - |
| Freezing point | -19 | °C |
| Recommended storage temperature | -19- 55 | °C |
| Suspended sediment (v/v) | <0,2 | % |
Field of Application
Fomtec Enviro SEA 1% is intended for use on class B hydrocarbon fuel fires such as Oil, Diesel and other water-immiscible fuels and class A fires such as wood, paper, textiles etc.
Fomtec Enviro SEA 1% is especially suited whenever a fluorine-free alternative with high fire performance is required for marine applications and the use of seawater.
Fomtec Enviro SEA 1% should be used with low or medium-expansion discharge devices or in systems designed for use with the product based on recommended minimum application rates, application duration, and discharge devices.
Fomtec Enviro SEA 1% is suitable for mobile firefighting by use of aspirating foam discharge devices such as foam branch pipes and monitors, where application rates and technique can be adjusted to the specifics of each incident.
Technical Documentation
Technical Specification –TDS Fomtec Enviro SEA 1% filed by RINA with n° PLFP/2747.
Risk AssessmentFomtec Enviro SEA 1% filed by RINA with n° PLFP/2746.
EU Declaration of Conformity filed by RINA with n° PLFP/2744.
ATTACHMENT TO
CERTIFICATE No. MED176723XP
Page 2 of 3
Tests Carried Out
According to IMO MSC.1/Circ.1312 & MSC.1/Circ.1312/Corr.1- "Revised guidelines for the performance and testing criteria, and surveys of foam concentrates for fixed fire-extinguishing systems", Test report filed by RINA
with n° PLFP/2745.
Note
The foam concentrate should be delivered with a declaration (i.e., Batch Certificate) of the main characteristics (sedimentation, pH value, expansion ratio, drainage time and volumetric mass). The declaration will be the basis for the annual condition test.
The storage container should be compatible with the foam concentrate throughout the service life of the foam.