MED514725WSENGF- -  -  N- 5910C-S -N- S- S- -26/12/2025- Marine Equipment- - SN- S- - N-  - 2,340,140B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED514725WS- N-Dec 25, 20302340140
 
Form
  Marine Equipment(TO)
MED495725WS
Certification N. MED514725WS - (ENG)
Certificate date 26/12/2025
Type Protezione antincendio
Product Devices to prevent the passage of flame into the cargo tanks in tankers: (a) P/V valves
Item Nº MED/3.12a

Model or Denomin.
Items
5910C-S
Applicant Fisher Jeon Gas Equipment (Chengdu) Co., Ltd.
Place of requester No.9, Wukedong 2 nd Road, Wuhan Science Technic Park, Wuhou District, Chengdu City, Sichuan Province Chengdu (Sichuan)  % CHINA
Tel. N.,Fax, Email 028-68718882, N.A, ke.xu@emerson.com
Directive (EU) 2025/1533
Standards IMO MSC/Circ. 677 (as amended by MSC.1/Circ. 1009 and MSC.1/Circ. 1324),ISO15364:2021,ISO/IEC 80079-49  
Reference Documents RINA Rules for the certification of Marine Equipment
Expire date 25/12/2030
Responsible Office RINA China Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED514725WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.12a
Description Devices to prevent the passage of flame into the cargo tanks in tankers: (a) P/V valves
Type 5910C-S
Applicant Fisher Jeon Gas Equipment (Chengdu) Co., Ltd.
No.9, Wukedong 2 nd Road, Wuhan Science Technic Park, Wuhou District, Chengdu City, Sichuan Province Chengdu (Sichuan),CHINA
Testing standards IMO MSC/Circ. 677 (as amended by MSC.1/Circ. 1009 and MSC.1/Circ. 1324),ISO15364:2021,ISO/IEC 80079-49  
Reference standards RINA Rules for the certification of Marine Equipment
Issued in RINA China Marine on
This Certificate is valid until
December 26, 2025
December 25, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED514725WS
Page 1 of 3
Product description
Pressure-vacuum relief valve with integrated deflagration flame arresters in two sizes:
• 3''X4'' and 4''X6''

Design according to:
1) ISO15364:2021 - Ships and marine technology - Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks
2) IMO MSC/Circ. 677 (as amended by MSC.1/Circ. 1009 and MSC.1/Circ. 1324) - Revised standards for design, testing and locating of devices to prevent the passage of flame into cargo tanks
3) ISO/IEC 80079-49 - Flame arresters, Performance requirements, test methods and limits for use

Material of construction:
Valve size
3''x4''
4''x6''
Body
Carbon steel, Stainless steel
Carbon steel, Stainless steel
Pallet
Stainless steel
Stainless steel
Gasket/Sealing
Nitrile,FKM,FEP,PTFE
Nitrile,FKM,FEP,PTFE

Application/Limitation
The pressure-vacuum valves covered by this certificate may be fitted on tanks containing products with
Maximum Experimental Safety Gap (MESG):
- Equal to or greater than 0.90 (Apparatus Group IIA) (Sizes: 3''X4'' and 4''X6'')







ATTACHMENT TO
CERTIFICATE No. MED514725WS
Page 2 of 3
Model No.
Size
Set Pressure
Max.working temperature(°C)
Max. Ice thickness(mm)
Max. allowable leak rate(m3/h)
Pressure side(KPa)
Vacuum side(KPa)
5910C-S
3''X4''
6~100
0.2~6.9
60
2
0.014
5910C-S
4''X6''
6~100
0.2~6.9
60
2
0.014
Installation and maintenance are to be in accordance with the manufacturer's certificate of conformity.

Products covered by this certificate shall be installed on vessels which outlet openings of gas-freeing systems on tanks are fitted with inert gas systems.

Products covered by this certificate shall be installed in sheltered spaces, in addition, an approved flame arrester(not covered by this certificate) should be installed end-of-line which is vented to atmosphere.

The endurance burn test is not carried out considering that flame arresters fitted at vacuum inlets through which vapours cannot be vented.

Materials chosen for the specific system shall be suitable for the intended medium and environmental conditions.

Maximum loading rate, sizing and location shall be in accordance with the latest revision of IMO MSC/Circ. 731.

A copy of the instruction manual shall be kept on board which shall include:


- installation instructions;
- operating instructions;
- maintenance requirements

Type Examination documentation
SSEI test report No. WHXF2025-498-0002-(01~06); WHXF2025-498-0003-(01~06);
Chengdu factory test report No. FJ-M-4052374-002; FJ-M-4052374-003; FJ-M-4052374-004;

Tests carried out
Corrosion, Hydraulic pressure, external ice, leakage tests, against flame transmission, flow measurement

Marking of product
As a minimum, the final product to be marked with at least the following particulars:
• Manufacturer's name or trademark.
• Type designation
• Additional marking acc. IMO MSC/Circ. 677 sec. 4.1 and ISO15364:2021 [12]
• Mark of conformity according to Article 10 of the Council Directive 2014/90/EU




ATTACHMENT TO
CERTIFICATE No. MED514725WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****