MED326822WS!001ENGD- -  -  N- LNK-LR-02C -N- S- S- -09/11/2022- Marine Equipment- - SN- S- - N-  - 1,057,166B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED326822WS/001- N-Nov 8, 20271057166
 
Form
  Marine Equipment(TO)
Certification N. MED326822WS/001 - (ENG)
Certificate date 09/11/2022
Type Mezzi di salvataggio
Product Position-indicating lights for life-saving appliances: (a) for survival craft and rescue boats
Item Nº MED/1.2a
USCG Category N° 161.101

Model or Denomin.
Items
LNK-LR-02C
Applicant XIAMEN LONAKO Inc.
Place of requester 1019-2 Wanjiachun Road, Torch High-tech Zone(Xiangan) Xiamen (Fujian)  % CHINA
Tel. N.,Fax, Email 0592-5606076, ---, vicky@lonako.com
Directive (EU) 2022/1157
Standards IMO Res. MSC.81(70), as amended, IEC 60945:2002 incl. IEC 60945 Corr. 1:2008, ISO 24408: 2005.
Reference Documents SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1630.
Request 2022/11/01
Expire date 08/11/2027
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED326822WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.2a
USCG Category Nº 161.101
Description Position-indicating lights for life-saving appliances: (a) for survival craft and rescue boats
Type LNK-LR-02C
Applicant XIAMEN LONAKO Inc.
1019-2 Wanjiachun Road, Torch High-tech Zone(Xiangan) Xiamen (Fujian),CHINA
Testing standards IMO Res. MSC.81(70), as amended, IEC 60945:2002 incl. IEC 60945 Corr. 1:2008, ISO 24408: 2005.
Reference standards SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1630.
Issued in SHANGHAI on
This Certificate is valid until
November 9, 2022
November 8, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED326822WS/001
Page 1 of 3

Product Description


Model of light : LNK-LR-02C - steady light for internal and flashing light for external in accordance with IMO Res MSC 218(82), MSC 207(81) and MSC 226(82).

Description:


The light comprises three items: the battery body, the external light with wire and the internal light with wire.
When the liferaft is inflated, the battery is automatically activated by pulling out the activation pin connected to the liferaft. Both lights are activated at the same time.
Each lights can also be switched off and on manually.

The above light is manufactured with following characteristics:

  • Dimension of battery body: 62 x 73 x 33.5 mm;
  • Dimension of external lights: diameter 62.5 mm, height 42 mm;
  • Color of dome : Transparent or Semi-transparent;
  • Type of battery: 1 x 3.6 volts lithium battery ER26500M;
  • Internal light: 1 x LED Straw Hats white Ø 5mm or 1 x chip LED (60mA, 3.0v),
External light: 3 x white LED Ø 5mm (1W, 300 mA) or 3 x chip LED (150mA, 3.0v);
  • Flash rate : about 50~70 flashes per minute;
  • Material of body: polycarbonate;
  • Total weight: 223 grams.
Reference Documents

Bill of Material edited by Xiamen Lonako Industry & Trade CO., Ltd and approved by RINA with No.: SHFP-21560.

Technical drawing edited by Xiamen Lonako Industry & Trade CO., Ltd and approved by RINA with No.: SHFP-21500.





ATTACHMENT TO
CERTIFICATE No. MED326822WS/001
Page 2 of 3

Continued:

Operation and Maintenance Instructions edited by Xiamen Lonako Industry & Trade CO., Ltd and filed by RINA with No.: SHFP-21501.

Technical specification edited by Xiamen Lonako Industry & Trade CO., Ltd and approved by RINA with No.: SHFP-21502.


Tests Carried Out

Evaluation and test report edited by RINA Shanghai Office in accordance with IMO Res. MSC.81(70) and MSC/Circ.980 and filed with No.: CSST 5833.

Inspection report (Ref. No.: 2010YW033) edited by National Supervision and Testing Center of Fishery Machinery and Instrument and filed by RINA with No.: SHFP-21457.

Test report (Ref. No.: 20092275 / 20092276 / 20092277) dated 25/01/2010 edited by Center of Analysis & Measurement of Shanghai Institute of Industrial Microbiology and filed with No.: SHFP-21508.

Additional Evaluation and Test Report (Ref. No.: 2022LR-02C) edited Xiamen Lonako Industry & Trade CO., Ltd according to Chapter 8.3, 8.5 and 11.2 of IEC 60945:2002 incl. IEC 60945 Corr.1 (2008) and filed by RINA with No.: SHFP-21470;

Additional Evaluation and Test Report (Ref.: No. 2022LR-02C-02) edited by Xiamen Lonako Industry & Trade CO., Ltd according to ISO 24408:2005 and filed by RINA with No.: SHFP-21454;

Routine Test Report edited by Xiamen Lonako Industry & Trade CO., Ltd and filed by RINA with No.: SHFP-21505.


Field of Application

External and internal light for inflatable liferafts.

Notes

Previous issued MED Module B certificate No.: MED181719WS/001 which is intended to be expired on April 11, 2024 was annulled and replaced accordingly.




ATTACHMENT TO
CERTIFICATE No. MED326822WS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****