- Seamless pipes and tubes in carbon and carbon-manganese steel as follow:
- Grade 320HA; 360HA; 360HB; 410HB; 410HD; 460HB; 460HD (as per RINA Rules, PtD, Ch2, Sec2)
- Maximum outside diameter: 250 mm
- Maximum wall thickness: 60 mm
- Seamless pipes and tubes in low alloy steel as follow:
- Grade 0.3Mo; 0.5Cr0.5Mo; 1Cr0.5Mo; 2.25Cr1Mo; 0.5Cr0.5Mo0.25V (as per RINA Rules, PtD, Ch2, Sec2)
- Maximum outside diameter: 244.5 mm
- Maximum wall thickness: 30 mm
Manufacturing process : Cold rolled and Hot rolled;
Delivery condition: Normalizing;
Survey conditions: The pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.
Remarks: Including automatic non-destructive testing UT and ET in lieu of hydraulic testing according with relevant piping standard.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate. |
|