MED381326CS!005ENG- -  -  N- MD9900 smoke detector -N- S- S- -21/06/2026- Marine Equipment- - SN- S- - N-  - 840,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED381326CS/005- N-Jun 21, 2031840487
 
Form
  Marine Equipment(TO)
Certification N. MED381326CS/005 - (ENG)
Certificate date 21/06/2026
Type Protezione antincendio
Product Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (d) Smoke detectors: Point detectors using scattered light, transmitted light or ionization
Item Nº MED/3.51d

Model
Items/Sizes
MD9900 smoke detector
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA GRETI DEL VARA 9  %  19020 Follo (SP)  % ITALY
Tel. N.,Fax, Email 0187 599101, 0187 558983, d.dido@microdatasrl.it
Directive (EU) 2025/1533
Standard EN 54-7:2018,IEC 60092-504:2016,IEC 60533:2015
Reference Documents Solas 74 Reg. II-2 /7 ,# Solas 74 Reg. X/3,# IMO Res. MSC.36(63)-(1994 HSC Code)7,# IMO Res.MSC.97(73)-(2000 HSC Code) 7,# IMO Res.MSC.98(73)-(FSS Code) 9,# IMO MSC.1/Circ.1242,# RINA Rules for the certification of Marine Equipment.
Validity 21/06/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Chiara Boscolo S

EC TYPE EXAMINATION (MODULE B)
No. MED381326CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.51d
Description Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (d) Smoke detectors: Point detectors using scattered light, transmitted light or ionization
Type MD9900 smoke detector
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
VIA GRETI DEL VARA 9,19020 Follo (SP),ITALY
Testing standards applied EN 54-7:2018,IEC 60092-504:2016,IEC 60533:2015
Regulations specified and reference documents Solas 74 Reg. II-2 /7 ; # Solas 74 Reg. X/3; # IMO Res. MSC.36(63)-(1994 HSC Code)7; # IMO Res.MSC.97(73)-(2000 HSC Code) 7; # IMO Res.MSC.98(73)-(FSS Code) 9; # IMO MSC.1/Circ.1242; # RINA Rules for the certification of Marine Equipment.
Issued in Genoa on
This Certificate is valid until
June 21, 2026
June 21, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
No.  MED381326CS/005
Page 1 of 4

Products description:

MD 9900 Smoke detector
Analogue, addressable microprocessor based photoelectric smoke detector including a temperature sensor for analog measurement

Reference documents:
Microdata Due ELET/44871 Technical specification ST21405 rev. D
Microdata Due ELET/44874 Software description D23583 rev. A
Microdata Due ELET/44872 Data sheet: D24728 rev. H
Microdata Due ELET/44873 Risk Assessment D36688 rev. 0
Microdata Due ELET/44875 Comparing Lexan 920 and Lexan 923 resin D36647 rev. 0

Test Reports:
TesLab Laboratory:
No. 214123E (RINA Id. ELET/44815); Reference Standard: EN 50130-4:2011+A1:2014; Date: 10/05/2021
No. 17B302E-a (RINA Id. ELET/44816); Reference Standard: IEC 60092-504; Date: 12/01/2018
BRE Testing Laboratory:
No. TE213449-A (RINA Id. ELET/44813); Reference Standard: EN 54-7:2000 and Marine Test; Date: 10/2007
No. TE213449SW (RINA Id. ELET/44814); Reference Standard: EN 54-7:2000 Software Evaluation; Date: 11/2004
Istituto Giordano Laboratory:
No. 213254 (RINA Id. ELET/44817); Reference Standard: CEI EN 60529:1997 Enclosure Protection; IP 32 with detector bases MD9900-BC and MD9900BCI; IP 65 with detector bases MD9900-BS and MD9900-BSI; Date: 06/2006
Microdata Due Test Report No. 196 Annex to IS-24743 (RINA Id. ELET/44878): Functional Test; Witnessed by RINA; Date: 22/02/2005.




ATTACHMENT TO
No. MED381326CS/005
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****