MED531524CS!001ENGD- -  -  N- CBA60 -N- S- S- -09/01/2025- Marine Equipment- - SN- S- - N-  - 2,334,847B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED531524CS/001- N-Jan 8, 20302334847
 
Form
  Marine Equipment(TO)
MED642824WS
Certification N. MED531524CS/001 - (ENG)
Certificate date 09/01/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a

Model or Denomin.
Items
CBA60
Applicant CHINA SHIPBUILDING JIUJIANG HAIKE INTERIOR DECORATION CO., LTD.
Place of requester NO.30 SHINIU ROAD, CHENGXI PORT AREA, ECONOMIC DEVELOPMENT ZONE Jiujiang (Jiangxi)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference Documents SOLAS 74 Reg.II-2/3.2,IMO Circ. MSC 1120,SOLAS 74 Reg. II-2/9,IMO Circ. MSC.1 1434,IMO Circ. MSC.1 1616,IMO Circ. MSC.1 1621
Request 28/11/2024
Expire date 08/01/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED531524CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.11a
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type CBA60
Applicant CHINA SHIPBUILDING JIUJIANG HAIKE INTERIOR DECORATION CO., LTD.
NO.30 SHINIU ROAD, CHENGXI PORT AREA, ECONOMIC DEVELOPMENT ZONE Jiujiang (Jiangxi),CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference standards SOLAS 74 Reg.II-2/3.2; IMO Circ. MSC 1120; SOLAS 74 Reg. II-2/9; IMO Circ. MSC.1 1434; IMO Circ. MSC.1 1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
January 9, 2025
January 8, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED531524CS/001
Page 1 of 2

Product description

Bulkhead composed of panels having maximum dimensions of 600 mm (W) and 3000 mm (H) and thickness of 50 mm. The symmetrical structure of each panel is composed by a layer of galvanized steel 0.5 mm thick, a layer of magnesium oxide board produced by Suzhou Eron Industrial Co, Ltd 5 mm thick, a layer of mineral wool type HYBST produced by Zibo Huayuan New Material Co, Ltd having thickness of 39 mm an density of 60 kg/m3, a layer of magnesium oxide board produced by Suzhou Eron Industrial Co, Ltd 5 mm thick and a layer of galvanized steel 0.5 mm thick. The insulating material is glue by means of two-component polyurethane adhesive type YB2002X/YB8001. The joints between panels are composed by means of galvanized steel bended strengthened profile with total dimensions of 39x41 mm and 0.5 mm thick and two layers of magnesium oxide board 10 mm thick. The bulkhead is fixed on perimeter with a couple of L steel profiles having dimensions of 63x63 and 6 mm thick, welded as per instructions on the drawing.

Field of application

Fire resistant A-60 Class lightweight panel Bulkhead for general application.

Reference documents

Drawing: JIANG XI CHAO YANG MACHINERY CO, LTD. No. 354CYC157 enclosed on the Test as per SGS Test Report No. AJFS2409011410FR issued on 05 November 2024.
Tests carried out

Test as per SGS Test Report No. AJFS2409011410FR issued on 05 November 2024 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED531524CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****