MED162826PU!001ENG- -  -  N-  HOT-HP100S -N- S- S- -15/10/2026- Marine Equipment- - NN- S- - N-  - 2,372,887B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED162826PU/001- N-Oct 14, 20312372887
 
Form
  Marine Equipment(TO)
Certification N. MED162826PU/001 - (ENG)
Certificate date 15/10/2026
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
HOT-HP100S
Applicant HLB OCEAN TECH CO., LTD.
Place of requester 135-56 Jinsan-daero, Jinyeong-eup, Gimhae-si  %  50859 Gimhae-Si (Gyeongsangnam-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email ---, ---, design7@hlboceantech.com
Directive (EU) 2026/1434
Standards IMO Res MSC 81(70) as amended
Reference Documents SOLAS 74 Reg. III/4, SOLAS 74 Reg. X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8.
Expire date 14/10/2031
Head Office RINA Korea Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jin Young Kim S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED162826PU/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type HOT-HP100S
Applicant HLB OCEAN TECH CO., LTD.
135-56 Jinsan-daero, Jinyeong-eup, Gimhae-si,50859 Gimhae-Si (Gyeongsangnam-do),REPUBLIC OF KOREA
Testing standards IMO Res MSC 81(70) as amended
Reference standards SOLAS 74 Reg. III/4, SOLAS 74 Reg. X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8.
Issued in RINA Korea Marine on
This Certificate is valid until
October 15, 2026
October 14, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED162826PU/001
Page 1 of 3


Product Description

  • 'HOT-HP100S' is a hydraulic pivoting gravity davit combined with HOT-HPWR55S / HOT-HPWL55S winch, for launching and recovery of life / rescue boats by falls.
  • Maximum working load: 10,000 kg (98.10 kN)
  • Maximum hoisting load: 5,000 kg (49.05 kN)
  • Maximum operating list and trim: List 20°, Trim 10°

























ATTACHMENT TO
CERTIFICATE No. MED162826PU/001
Page 2 of 3
Technical Documentation
  • Technical drawings and Manual, filed by RINA listed on Letter No. PUST/2026/594/YK008.
Tests Carried Out
  • Evaluation and test report, witnessed by RINA dated 21-09-2026, filed by RINA with No. PUST-31778.
  • Shop test report, witnessed by RINA dated 21-09-2026, filed by RINA with No. PUST-31779.
  • Application/Limitation

    • Production and installation testing shall be carried out according to IMO Res. MSC.81(70), part 2 as amended.
    • Grades of materials as stated on drawings are to be delivered with maker’s product certificates.
    • The various components transferring the load like wires, shackles, hooks, etc. are to comply with international standard or code and are to be delivered with manufacturer's certificate, confirming a minimum safety factor of 6 compared to the sustained load.
    • Falls to be used with the launching appliance shall be of rotation-resistant and corrosion-resistant steel wire rope.
    • The wedge sockets used for the falls shall be suitable for rotation-resistant steel wire rope, with a minimum termination efficiency of 75% and a minimum breaking load not less than that of the fall wire rope.
    • The onboard arrangements, installation of this equipment and support to the deck structure and connection to power supply are not included in this certificate and shall be to the satisfaction of the attending classification society or the flag administration in each case.
    • Instructions for installation, use and maintenance are to be available in the ship’s official language.
    • Marking of product shall be implemented in accordance with the LSA Code, item 1.2.2.9.

    Notes
    • None.








    ATTACHMENT TO
    CERTIFICATE No. MED162826PU/001
    Pages 3 of 3
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Jin Young Kim
    **** NOTICE: This is NOT an official certificate ****