MED210925CS!002ENG- -  -  N- WV-TO Transit -N- S- S- -23/09/2025- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED210925CS/002- N-Sep 22, 2030254401
 
Form
  Marine Equipment(TO)
Certification N. MED210925CS/002 - (ENG)
Certificate date 23/09/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
WV-TO Transit
Applicant DE WAVE S.R.L.
Place of requester VIA DE MARINI 1  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email 01064020886; davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/9,IMO Res. MSC.1/Circ.1655.
Request 15/07/2025
Expire date 22/09/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED210925CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type WV-TO Transit
Applicant DE WAVE S.R.L.
VIA DE MARINI 1,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/9; IMO Res. MSC.1/Circ.1655.
Issued in Genoa on
This Certificate is valid until
September 23, 2025
September 22, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED210925CS/002
Page 1 of 2

Product description

Certified Bulkhead with No. MED188923CS/004 dated 11/09/2023 with a total height of 2470 mm total width 2400 mm, on which the following accessories can be installed:

1. Detail Z: Brass transit of the bulkhead through which passes a stainless steel tube with a diameter of 42 mm; the tube is fixed using a flanged nut on the exposed side of the bulkhead and insulated for its entire length in the non-exposed part by a cup-shaped insulation of Rockwool prorox PS 960 wool with a thickness of 30 mm and a density of 100 kg/m3. The tube is installed at a height of 300 mm from the base of the B class bulkhead.

2. Detail R: Brass transit of the bulkhead through which passes a multilayer plastic tube with a diameter of 22 mm; the tube is fixed using a metal clip fitting secured with carbon steel nuts.

Field of application
Fire resistant B-15 Class bulkhead with accessories.

Reference documents
De Wave group drawings No. C9999/AN/1707 Rev. 02 dated 15/07/2025 enclosed in the test report No. 2025CS012109/2

Tests carried out
Tests as per Rina laboratory test report No. 2025CS012109/2 issued on 23/09/2025 according to IMO Res. MSC.307(88)-(2010 FTP Code), as amended.




ATTACHMENT TO
CERTIFICATE No. MED210925CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****