MED764925WS!003ENGD- -  -  N- YA5556-I, YA5556-II -N- S- S- -16/03/2026- Marine Equipment- - SN- S- - N-  - 1,187,390B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED764925WS/003- N-Mar 15, 20311187390
 
Form
  Marine Equipment(TO)
Certification N. MED764925WS/003 - (ENG)
Certificate date 16/03/2026
Type Mezzi di salvataggio
Product Lifebuoys NOT intended for combined use with item MED/1.10 - Lifebuoys intended for combined use with item MED/1.10
Item Nº MED/1.1

Model or Denomin.
Items
YA5556-I, YA5556-II
Applicant Jiangsu Yean Environmental Protection Equipment Science and Technology Co., Ltd.
Place of requester No. 88 Yuanlin Road, Xinjie Town, Dongtai City, Jiangsu Province  % CHINA
Tel. N.,Fax, Email 0515-85755695, ---, y13301416505@126.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1628/Rev.2.
Request 2025/06/29
Expire date 15/03/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED764925WS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.1
Description Lifebuoys NOT intended for combined use with item MED/1.10 - Lifebuoys intended for combined use with item MED/1.10
Type YA5556-I, YA5556-II
Applicant Jiangsu Yean Environmental Protection Equipment Science and Technology Co., Ltd.
No. 88 Yuanlin Road, Xinjie Town, Dongtai City, Jiangsu Province,CHINA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1628/Rev.2.
Issued in SHANGHAI on
This Certificate is valid until
March 16, 2026
March 15, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED764925WS/003
Page 1 of 3

Product Description


The Lifebuoys (Type: YA5556-I, YA5556-II) are manufactured with the following main characteristics:

Main Characteristics:

Items / Type
YA5556-I
YA5556-II
Diameter
Outer Diameter
720±10 mm
760±10 mm
Inner Diameter
440±10 mm
460±10 mm
Section
Axis
110±2 mm
110±2 mm
Mass of the Lifebuoy
> 2.5 Kg
> 4.3 Kg

Materials:
- Shell, Polyethylene Plastic;
- Buoyancy, Polyurethane Foam;
- Grabline, Φ9.5mm Nylon Rope.

Retro-Reflecting material fitted around the body at four evenly-spaced points.


Field of Application

The design assessment is based on International Life-Saving Appliances (LSA) Code, IMO Res. MSC.48(66) as amended by IMO Res. MSC.207(81) and IMO Res. MSC.218(82).

Maximum Installation Height: 100 m.

YA5556-I: This lifebuoy is not intended to operate the quick-release arrangement provided for the self-activated smoke signal and self-igniting lights.


YA5556-II: This lifebuoy is intended to operate the quick release arrangement provided for the self-activated smoke signals and self-igniting lights.

ATTACHMENT TO
CERTIFICATE No. MED764925WS/003
Page 2 of 3

Continued:

Remarks

The product is to be marked with name of manufacturer, type designation, date of manufacture, expiry and operational restrictions and approval information including approval information.

The product should be provided with brief instructions or diagrams clearly illustrating the use, also the manual operation, printed on the casing.

Production and installation testing shall be carried out according to IMO Res. MSC.81(70) part 2.

Retro-reflective material used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. If the lifebuoys are fitted with position-indicating lights or lifebuoys self-activating smoke signals, these shall also be approved according to the Marine Equipment Directive and bear the Mark of Conformity.


Reference Documents

Tests are documented in accordance with the recommendation on testing of Life-Saving Appliances, IMO Res. MSC.81(70) part 1, as amended by IMO Res. MSC.200(80) and IMO Res. MSC.226(82) and IMO Res. MSC.323(89).
- Technical Drawing (Type: YA5556-I), approved by RINA with n° SHFP-34398.
- Technical Drawing (Type: YA5556-II), approved by RINA with n° SHFP-34399.
- Technical Specification, filed by RINA with n° SHFP-34540.
- Qualified Lifebuoy Supplier List, filed by RINA with n° SHFP-34539.
- Instructions for use and installation of life buoy, filed by RINA with n° SHFP-34687.
- Marking, filed by RINA with n° SHFP-34688.

Tests Carried Out

Lifebuoys Evaluation and Test Report issued by Wuhan Testing Center of Marine Life-Saving Appliances, according to IMO Res.MSC.81(70) as amended by MSC.200(80) and MSC.226(82) as below:
1. YA5556-I
Evaluation and Test Report (Ref No.:2026032), and filed by RINA with n° SHFP-36575.
2. YA5556-II
Evaluation and Test Report (Ref No.:2026033), and filed by RINA with n° SHFP-36576.




ATTACHMENT TO
CERTIFICATE No. MED764925WS/003
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****