MED204224WSENGD- -  -  N- C&C NZ12,C&C NZ16 -N- S- S- -30/12/2024- Marine Equipment- - SN- S- - N-  - 1,144,541B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED204224WS- N-Dec 29, 20291144541
 
Form
  Marine Equipment(TO)
MED689024WS
Certification N. MED204224WS - (ENG)
Certificate date 30/12/2024
Type Protezione antincendio
Product Dual-purpose type nozzles (spray/jet type): (b) Hand-held branch pipes for fire service use - Smooth bore jet and/or one fixed spray jet angle branch pipes PN 16
Item Nº MED/3.55b

Model or Denomin.
Items
C&C NZ12,C&C NZ16
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email ---, 00390107261006, quality@canepaecampi.com
Directive (EU) 2024/1975
Standards EN 15182-1:2019, EN 15182-3:2019.
Reference Documents SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 2024/10/10
Expire date 29/12/2029
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED204224WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.55b
Description Dual-purpose type nozzles (spray/jet type): (b) Hand-held branch pipes for fire service use - Smooth bore jet and/or one fixed spray jet angle branch pipes PN 16
Type C&C NZ12,C&C NZ16
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards EN 15182-1:2019, EN 15182-3:2019.
Reference standards SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in SHANGHAI on
This Certificate is valid until
December 30, 2024
December 29, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED204224WS
Page 1 of 3

Product Description

Dual-purpose Spray/Jet Nozzles (Type: C&C NZ12, C&C NZ16) for discharging water from the ship’s fire main by using fire hoses.
Normal Type
C&C NZ12
C&C NZ16
Nozzle Diameter (mm)
12
16
Working Pressure (bar)
6
6
Nominal Diameter (mm)
40
40
Flow Rate at Straight Jet (*) (@6 bar) (L/min)
233
350
Effective Throw at Straight Jet (@6 bar) (m) (*)
27
32
Flow Rate at Spray Full (**) (@6 bar) (L/min)
215
338
Effective Throw at Spray Full (@6 bar) (m) (**)
13
14
Max. Spray Angle (@6 bar)
>30
>30
Mass (Kg) (*)
1.22
1.24
Note: *: Data from Test Report **: Date from Technical Specification

Field of Application
Dual-purpose type nozzles (Spray/Jet type) to be used in conjunction with hoses for fire fighting purposes on board ships.
The dual-purpose type nozzle may be equipped with fixed couplings as well, if the operability of the nozzle is not impaired.
Each product is to be delivered with its manual for use and maintenance handbook according to EN 15182-1 Ch. 8.1.

Reference Documents
- Technical Drawing (C&C NZ12), approved by RINA with No.: SHFP-29049;
- Technical Drawing (C&C NZ16), approved by RINA with No.: SHFP-29052;
- Bill of Material (C&C NZ12), filed by RINA with No.: SHFP-29048;
- Bill of Material (C&C NZ16), filed by RINA with No.: SHFP-29051;
- Technical Specification (C&C NZ12) filed by RINA with No.: SHFP-29050;
- Technical Specification (C&C NZ16) filed by RINA with No.: SHFP-29053;
- Instruction for Installation, Safe operation and Maintenance (C&C NZ12 / C&C NZ16), filed by RINA with No.: SHFP-29515;
- Marking, filed by RINA with No.: SHFP-29337.


ATTACHMENT TO
CERTIFICATE No. MED204224WS
Page 2 of 3

Continued:

Tests Carried Out
Test Report (Ref No.: 202401) in compliance with EN 15182-1:2019 & EN 15182-3:2019 and witnessed by RINA Surveyor, filed by RINA with No.: SHFP-29359.

Remark
The product is to be marked according to EN 15182-1:2019 Ch. 8.2 and in addition with the MED Mark of Conformity, Notified Body No. and the year of manufacturing.

For Jet Spray Angles and Adjustment Positions, also to be clearly marked.

Each branchpipe shall be delivered with an instruction and maintenance handbook, according to Ch. 8.1.2 & 8.1.3 of EN 15182-1:2019.





ATTACHMENT TO
CERTIFICATE No. MED204224WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****