MED374626CS!003ENG- -  -  N- PROFILM AFFF -N- S- S- -01/07/2026- Marine Equipment- - SN- S- - N-  - 537,075B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED374626CS/003- N-Jun 30, 2031537075
 
Form
  Marine Equipment(TO)
Certification N. MED374626CS/003 - (ENG)
Certificate date 01/07/2026
Type Protezione antincendio
Product Expansion foam for fixed fire extinguishing systems for chemical tankers
Item Nº MED/3.59

Model or Denomin.
Items
PROFILM AFFF
Applicant PROFOAM SRL
Place of requester VIA MARCONI, 21  %  28060 San Pietro Mosezzo (NO)  % ITALY
Tel. N.,Fax, Email 0321 485511, 0321 485522, carlo.boledi@profoam.it
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1312, IMO MSC.1/Circ.1312/Corr.1.
Reference Documents Chapter II-2, SOLAS 74 Convention, as amended,IMO Resolution MSC.4(48) IBC Code, as amended,IMO MSC/Circ.553
Request 09/06/2026
Expire date 30/06/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Fabio Morbioni S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED374626CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.59
Description Expansion foam for fixed fire extinguishing systems for chemical tankers
Type PROFILM AFFF
Applicant PROFOAM SRL
VIA MARCONI, 21,28060 San Pietro Mosezzo (NO),ITALY
Testing standards IMO MSC.1/Circ.1312, IMO MSC.1/Circ.1312/Corr.1.
Reference standards Chapter II-2, SOLAS 74 Convention, as amended; IMO Resolution MSC.4(48) IBC Code, as amended; IMO MSC/Circ.553
Issued in Genoa on
This Certificate is valid until
July 1, 2026
June 30, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED374626CS/003
Page 1 of 2

Technical Characteristics



Foam Concentrate PROFILM AFFF
Type of foam concentrate Type B - Low expansion synthetic-based Acqueous Film Forming Foam
concentrate
Mixing Ratio 3% - 6%
Density at 20 °C 1.02 g/ml
Viscosity at 20 °C 3.2 cST
pH at 20 °C 7.02
Minimum use temperature -15 °C
Expansion Ratio at 20 °C Mixing Ratio 3%: 8.58
Mixing Ratio 6%: 9.71
Drainage time 25% Mixing Ratio 3%: 3' 20''
Mixing Ratio 6%: 4' 40''


Field of Application

Fixed foam fire extinguishing systems for cargo deck using low expansion foam concentrate for extinguishing fires
of the following products, at ambient temperature and pressure:
  • Chemical liquid products for which regular foam is accepted in accordance with Chapter 17 of the IMO Codes for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk, IBC Code - Chapter 17 and BCH Code - Chapter 6, and
  • Chemical liquid products to which neither IBC nor BCH Codes apply, for which regular foam is accepted in accordance with IMO Circular MSC/Circ.553.
Tests Carried Out

Tests in accordance with IMO Circular MSC.1/Circ.1312 "Revised guidelines for the performance and testing criteria, and surveys of foam concentrates for fixed fire-extinguishing systems".

Technical Documentation

  • File no. 2003/CS/01/5236 and attached Test Report no. FPE2003/CS/01/5236 (Pg.1 to 3).
  • Risk Assessment, issued by Profoam S.r.l. and filed with no. CSST-26547.




ATTACHMENT TO
CERTIFICATE No. MED374626CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****