MED328624CS!003ENG- -  -  N- PULLMAN BED_DW Deck -N- S- S- -20/11/2025- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED328624CS/003- N-Nov 19, 2030254401
 
Form
  Marine Equipment(TO)
Certification N. MED328624CS/003 - (ENG)
Certificate date 20/11/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
PULLMAN BED_DW Deck
Applicant DE WAVE S.R.L.
Place of requester Via De Marini 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference Documents SOLAS 74 Reg. II-2/3.2,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO Circ. MSC.1 1434,IMO Circ. MSC.1 1616,IMO Circ. MSC.1 1621
Request 11/07/2024
Expire date 19/11/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED328624CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type PULLMAN BED_DW Deck
Applicant DE WAVE S.R.L.
Via De Marini 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference standards SOLAS 74 Reg. II-2/3.2; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO Circ. MSC.1 1434; IMO Circ. MSC.1 1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
November 20, 2025
November 19, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED328624CS/003
Page 1 of 2

Product description



Membrane protection of the steel deck structural core performed, 400 mm below the deck plating,
consisting of Ceiling named DEM C5 certified by RINA, on B-15 Class, with Certificate No. MED188923CS/001 dated 11/09/2023. The ceiling is fitted with a parallelepiped steel box having dimensions of 974x2186 mm and height of 221.5 mm including a retractable bed. The box is composed of a steel sheet, 1.5 mm thick, and is insulated, on the outside, by means of one layer of mineral wool type ISOVER Ultimate SeaProtect Slab 66; 30 mm thick and density of 66 kg/m3. The mineral wool is fixed to the steel box by means of steel pins and washers. The box is suspended to the deck stiffeners by means of four tie rods having diameter of 10 mm and metallic profiles having dimensions of 100x50 mm. The box is fitted, on the perimeter, with a steel profile 3 mm thick, that make the closure with the ceiling panels. The bed is hinged to the closing hatch that is composed of steel sheet having thickness of 1.5 mm and fitted with a system closure, that acts on two points, actuated by a square key.

The ceiling may also be produced by:
- Inoxking srl - via Cal Longa 22 - 31028 Vazzola (TV) Italy
- Nova Stampaggi snc - via Agnelli 3 - Z.A. Villotta - 33083 Pordenone (PN) Italy
- Metaldesi srl - via Ermanno Casoli 4 - 60044 Fabriano (AN) Italy
.
Field of application

Fire resisting A-30 Class deck with fire hazard on side fitted with the steel sheet.
Reference documents

DE WAVE drawing No. C9999/AA/1679 Rev.2 dated 12 December 2024 enclosed on Test Report No.2024CS013286/3 dated 20 December 2024.
Tests carried out

Tests as per RINA Test Laboratory Report No. 2024CS013286/3 issued on 12 December 2024 according to IMO 2010 FTP CODE Part 3 Annex 1.




ATTACHMENT TO
CERTIFICATE No. MED328624CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****