FAB786125WS!002ENG- -  -  N- Ferritic austenitic (duplex) steels -N- S- S- -15/11/2025- Fabbricanti Approvati- - NN- N- - S-  - 1,057,099BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB786125WS/002- N-Nov 14, 20301057099
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB786125WS/002 - (ENG)
Certificate date 15/11/2025
Description
Tubi in acciaio saldati,Tubi in acciaio senza saldatura
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati,Tubi in acciaio senza saldatura

Model or Denomin.
Items
Ferritic austenitic (duplex) steels
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 14/11/2030
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB786125WS/002
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded steel pipes,Seamless steel pipes and tubes
Type Ferritic austenitic (duplex) steels
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until November 14, 2030
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB786125WS/002
Enclosure - Page 1 of 1
Ferritic austenitic (duplex) steels

APPROVAL CONDITIONS



1. Welded pipes and tubes in Ferritic austenitic (duplex) steels

Outside diameter: max. 610 mm, Wall Thickness: max. 32 mm

Manufacturing process: PAW - GTAW.
Heat treatment: solution annealing at 1050 - 1150 °C
Non destructive examination of welded seam: ultrasonic or radiographic test

2. Seamless pipes and tubes Ferritic austenitic (duplex) steels

Outside diameter: max. 508 mm, Wall Thickness: max. 25 mm

Manufacturing process: cold drawn or cold rolled
Heat treatment: solution annealing at 1050 - 1150 °C .

Survey conditions: the pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly

Note: The raw materials should be provided by RINA approved manufacturer.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.


RINA China Marine 11/15/2025
**** NOTICE: This is NOT an official certificate ****