MED471225CS!007ENGD- -  -  N- DM B0 / 1W APA DOUBLE BULKHEAD CONFIGURATION -N- S- S- -29/03/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED471225CS/007- N-Mar 28, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED471225CS/007 - (ENG)
Certificate date 29/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
DM B0 / 1W APA DOUBLE BULKHEAD CONFIGURATION
Applicant DE WAVE SRL
Place of requester VIA DE MARINI 1  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO MSC.1/Circ. 1581
Request 17/10/2025
Expire date 28/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED471225CS/007

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type DM B0 / 1W APA DOUBLE BULKHEAD CONFIGURATION
Applicant DE WAVE SRL
VIA DE MARINI 1,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
March 29, 2026
March 28, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED471225CS/007
Page 1 of 2

Product description

B-0 Class bulkhead certified by RINA with EC Type Examination Certificate No. MED471225CS/006 dated 29 March 2026 composed of two side by side bulkheads and equipped with the following accessories on each side:
  1. electric box fitted at the maximum height of 2100 mm and composed of steel sheet, 0.6 mm thick, and having maximum dimensions of 185x80x34 mm. The box is insulated, on the internal side, by means of one layer of material having density of 130 kg/m3, thickness of 12 mm and dimensions of 220x325 mm type HKO Thermo E-glass D or KOBEMAT EGL.
  2. U shaped steel profiles, 2 mm thick and having dimensions of 80x10 mm fitted between the bulkhead steel sheets and the mineral wool and glued to the steel sheets on the side non exposed to the fire.
  3. transit of electric cables, having diameter of 9 mm, composed of
  • hole having diameter of 19 mm and 28 mm fitted with plastic corrugated tube, having diameter of 16 mm and 20 mm, type FMP; the transit is fitted, on the side exposed to the fire, with plastic ring type SB-1093-13
  • hole having diameter of 20 mm fitted with plastic bend pipe (90°) type CISPH16 and plastic pipe, having diameter of 16 mm, type HALO16 glued to the bulkhead on the side not exposed to the fire by means of adhesive type PU40; this transit may be installed on bulkhead panels composed of mineral wool glued to the steel sheets, having thickness of 0.7 mm, by means of adhesive type DUNAPOL AD 4020

Field of application
Fire resisting B-0 Class bulkhead for general application.
Reference documents
De Wave drawing Nos. DC-01-K1-19 dated 10 May 2019 approved on 30 March 2021 with endorsement No. LABS-2205.
Tests carried out
Tests as per RINA Test Laboratory reports No. 2015CS013659 issued on 24 November 2015 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED471225CS/007
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****