MED451322CSENGF- -  -  N- A60PRO1AHP -N- S- S- -22/11/2022- Marine Equipment- - SN- S- - N-  - 1,047,638B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED451322CS- N-Nov 21, 20271047638
 
Form
  Marine Equipment(TO)
MED004922TS/100,MED000223TS/006,MED000223TS/035,MED000223TS/019,MED000223TS/053,
MED000223TS/056,MED000223TS/028,MED000223TS/042,MED000223TS/062,MED000223TS/061,
MED000223TS/077,MED000223TS/074,MED003824TS/006,MED003824TS/009,MED003824TS/010
Certification N. MED451322CS - (ENG)
Certificate date 22/11/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
A60PRO1AHP
Applicant S.I.N. SERVICE SRL
Place of requester VIA DEL PESCATORE 3  %  80053 Castellammare Di Stabia (NA)  % ITALY
Tel. N.,Fax, Email 081 8018602, 081 8727940, ---
Directive (EU) 2022/1157
Standard IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 11/11/2022
Validity 21/11/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED451322CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type A60PRO1AHP
Applicant S.I.N. SERVICE SRL
VIA DEL PESCATORE 3,80053 Castellammare Di Stabia (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
November 22, 2022
November 21, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED451322CS
Page 1 of 2

Product description

Single leaf hinged door whose maximum clear opening size is 1100 mm wide and 2100 mm high. The door leaf, having width of 1137 mm and height of 2141 mm, is composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating material composed of a layer of material named PROMASIL MARINE, 60 mm thick and having density of 285 kg/m3. The insulating material is glued to the steel sheets by means of 200 g/ m2 of adhesive type PROTOPUR AE 100. The door frame is composed of an S shaped steel profile, 5 mm thick, and having dimensions of 80x76 mm, bolted to and L shaped profile, 6 mm thick and having dimensions of 60x60 mm (M 10 bolt and pitch 250 mm), fillet welded to the bulkhead. The frame is insulated by means of one layer of mineral wool, 60 mm thick and having density of 150 kg/m3, named SEAROX SL 660 or SEAROX SL 440. The door is fitted with a lever closing device that acts on three points actuated by the handle. The door may be fitted with a self-closing hose port having dimensions of 159x193 mm (WxH) insulated with PROMASIL MARINE.

Field of application
Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design

Reference documents
SIN SERVICE drawing No. A60PRO1AHP dated 7 August 2017 approved on 21 November 2017 with endorsement No. LABS-1562.

Tests carried out
Test as per RINA Test Laboratory report No. 2017CS013603/2 issued on 21 November 2017 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED451322CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****