Single leaf hinged door whose maximum clear opening size is 1050 mm wide and 2050 mm high. The door leaf, having maximum width of 1099 mm, maximum height of 2071 mm and thickness of 50 mm, is composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating material. This material is composed of one central layer of material named Promat Promaglaf GM having nominal thickness of 9.6 mm and nominal density of 165 kg/m3 and, on each side, one layer of material named Promat Pluratect Marine Light, having nominal thickness of 19 mm and nominal density of 500 kg/m3. The insulating material is glued to the steel sheets by means of 250 g/m2 of adhesive type Promat Kleber K84. The leaf is fitted, on the perimeter, with C-shaped stainless steel profile, 1.2 mm thick and having dimensions of 52.4x15 mm. The leaf is also fitted with a vertical stiffener composed of a steel profile having dimensions of 50x8 mm and thickness of 2 mm, placed at 220 mm from the edge of the leaf lock side, welded at the top and at the bottom, and with three reinforcement plates having dimensions of 40x5 mm welded to the perimeter of the leaf.
The door frame is composed of a U-shaped steel profile, 3 mm thick and having dimensions of 40x95 mm, screwed to the bulkhead. The sill, that constitutes the fourth side of the door frame, is composed of two C-shaped steel profiles 3 mm thick, screwed to the bottom. The door frame is screwed to a side frame composed of a L-shaped steel profile 4 mm thick appropriately shaped. The door frame and the side frame are insulated, on the exposed side, with two layers of mineral wool named Rockwool SEAROX SL970 having nominal thickness of 48 mm and nominal density of 115 kg/m3.
The door is fitted, on the upper corner lock side and on the lock side near the hose port, with thermal bolts.
The door may be fitted with a 1.2 mm thick stainless steel self-closing hose port having maximum dimensions of 160x189 mm, insulated with a layer of mineral wool named Rockwool SEAROX SL970 having nominal thickness of 48 mm and nominal density of 115 kg/m3.
Field of application Fire resistant A-60 Class single leaf hinged door intended for general applications in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents Naval Suppliers drawing No. FT_HBA62_1050x2050 Rev. 01 dated 17 January 2025 enclosed to RINA Test Laboratory Report No. 2024CS013037/3.
Tests carried out Tests as per RINA Test Laboratory Report No. 2024CS013037/3 issued on 24 January 2025 according to IMO 2010 FTP Code Part 3. |