DIP052026CSBIL- -  -  N- RANGE DI PORTE STAGNE INCERNIERATE IN ACCIAIO AH36 CON E SENZA OBLO' -N- S- S- -24/01/2026- Prodotti per nautica diporto- - NN- N- Stefano Moscatelli- N-  - 220,807Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP052026CS- N-Jan 19, 2028220807
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP052026CS - (BIL)
Certificate date 24/01/2026
Product Porta stagna

Model or Denomin.
Items
RANGE DI PORTE STAGNE INCERNIERATE IN ACCIAIO AH36 CON E SENZA OBLO'
RANGE OF WATERTIGHT STEEL AH36 HINGED DOORS WITH AND WITHOUT PORTHOLE
Applicant CALISTRI GIACINTO & C. S.N.C.
Place of requester VIA DEL REDOLONE 57/A - LOC. PONTE A STELLA  %  51034 SERRAVALLE PISTOIESE (PT) (PT)  % ITALY
Tel. N.,Fax, Email 0573 527023, 0573 520298, info@calistrisnc.com
Directive NONE
Standards RINA rules for the Classification of Yachts
Expire date 19/01/2028
Head Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP052026CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Porta stagna
Description Watertight door
Tipo RANGE DI PORTE STAGNE INCERNIERATE IN ACCIAIO AH36 CON E SENZA OBLO'
Type RANGE OF WATERTIGHT STEEL AH36 HINGED DOORS WITH AND WITHOUT PORTHOLE
Norme di riferimento RINA rules for the Classification of Yachts
Reference standards RINA rules for the Classification of Yachts








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a VIAREGGIO il 24  Gennaio  2026.  Questo Certificato è valido fino al 19 Gennaio 2028
   
Issued in VIAREGGIO  on January 24, 2026. This Certificate is valid until January 19, 2028
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP052026CS
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
RANGE DI PORTE STAGNE INCERNIERATE IN ACCIAIO AH36 CON E SENZA OBLO'
Documenti di riferimento:
- Pratica n° RS/2026/CS/01/520
Reference documents:
- Job nr. RS/2026/CS/01/520

Descrizione Prodotto:
Product Description:
- Porte stagne incernierate in acciaio AH36 senza oblò: dimensioni lato cerniere da 550 a 1800 mm, lato orizzontale da 450 a 650 mm.
Watertight steel AH36 hinged doors without porthole: dimensions hinged side from 550 to 1800 mm, horizontal side from 450 to 650 mm.
- Porte stagne incernierate in acciaio AH36 con oblò: dimensioni lato cerniere da 800 a 1800 mm, lato orizzontale da 500 a 650 mm.
Watertight steel AH36 hinged doors with porthole: dimensions hinged side from 800 to 1800 mm, horizontal side from 500 to 650 mm.
- Vedere disegno approvato con n° DIP/142984.
See drawing approved with nr. DIP/142984.
- Dovrà essere rispettata la condizione che il numero di cerniere installate su una porta non sia mai inferiore al numero di cerniere installate sulla porta testata di dimensioni immediatamente superiori.
Number of hinges is to be such that, for a given door size, the number of hinges is at least equal to the number of hinges of the tested door of the next size up.
- Dopo l'installazione a bordo, deve essere eseguita prova di spingardatura.
After installation on board, a water jet test is to be carried out.
- L'omologazione è riferita alla sola "tenuta stagna a battente".
The T.A. is relevant only to "watertightness".
- Porte idonee per un battente di pressione idraulica pari a 3 m.
Doors suitable for an hydraulic pressure of 3 m water head.
- Porte installate su percorsi di sfuggita dovranno essere apribili da entrambi i lati (le maniglie dovranno esser permanentemente fissate).
Doors fitted on escape ways are to be openable by both sides (handles are to be permanently fixed).
Campi di applicazione:
- Porte stagne a battente per "RINA Rules for the Classification of Yachts".
Fields of application:
- Watertight doors for "RINA Rules for the Classification of Yachts".


 Viareggio, 24 Gennaio 2026 
   Viareggio January 24, 2026
**** NOTICE: This is NOT an official certificate ****