MED274326CSENGD- -  -  N- Planitex Stopfire spessore 20 mm -N- S- S- -11/05/2026- Marine Equipment- - SN- S- - N-  - 0B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED274326CS- N-May 10, 20310
 
Form
  Marine Equipment(TO)
Certification N. MED274326CS - (ENG)
Certificate date 11/05/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.105

Model or Denomin.
Items
Planitex Stopfire spessore 20 mm
Applicant MAPEI SPA
Place of requester VIA CARLO CAFIERO, 22  %  20158 Milano (MI)  % ITALY
Tel. N.,Fax, Email 02 376731, 0237673214, leoni@mapei.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference Documents SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616, IMO MSC.1/Circ.1621
Request 15/04/2026
Expire date 10/05/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED274326CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.105
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type Planitex Stopfire spessore 20 mm
Applicant MAPEI SPA
VIA CARLO CAFIERO, 22,20158 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference standards SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616, IMO MSC.1/Circ.1621
Issued in Genoa on
This Certificate is valid until
May 11, 2026
May 10, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED274326CS
Page 1 of 2
Manufacturer
MAPEI SPA - ISE02

Place of Manufacturer


XXXX
20100 XXXX (MI)
ITALY


Product description
Steel deck covered, on the side not exposed to the fire, with a layer of non-combustible product having thickness of 20 mm and density of 500 kg/m3 named PLANITEX STOPFIRE (manufacturer Mapei SPA).
Field of application
Fire resistant A-30 Class deck.
Reference documents
Mapei SpA drawing No. 10/21 - A60 dated 21 January 2021 approved on 10 May 2021 with endorsement No. LABS-2226.
Tests carried out
Test as per RINA Test Laboratory report No. 2021CS01448/1 issued on 10 May 2021 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED274326CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****