MED497821CS!002ENGB- -  -  N- WINDOW - A CLASS - TYPE SC -N- S- S- -04/04/2022- Marine Equipment- - SN- S- - N-  - 726,321B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED497821CS/002- N-Apr 3, 2027726321
 
Form
  Marine Equipment(TO)
MED497821CS/002
Certification N. MED497821CS/002 - (ENG)
Certificate date 04/04/2022
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
WINDOW - A CLASS - TYPE SC
Applicant HET ANKER BV
Place of requester KAATSBAAN 10 4209 AD SCHELLUINEN  % NETHERLANDS
Tel. N.,Fax, Email 0183-623135, 0183-626122, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 14/12/2021
Expire date 03/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED497821CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type WINDOW - A CLASS - TYPE SC
Applicant HET ANKER BV
KAATSBAAN 10 4209 AD SCHELLUINEN,NETHERLANDS
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 4, 2022
April 3, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED497821CS/002
Page 1 of 2

Product description

Window having maximum clear opening size of 1768 mm in width and 1968 mm in height. The frame is composed of a carbon steel T shaped profile having height of 242 mm and thicknesses of 10 mm (web) and 12 mm (flange) welded to the bulkhead on the side exposed to the fire. At a distance of 100 mm from the bulkhead, a steel flat, having width of 40 mm and thickness of 10 mm, is welded to the T shaped profile web. To such flat is fixed, by means of M6 screws, an L shaped steel profile having dimensions of 32x25x12 mm. The steel glass retaining frame, having thickness of 3 mm and width of 32 mm, is screwed to this profile. The glass pane compound, having minimum total thickness of 15.5 mm, is composed of a toughened glass having thickness of 6 mm (manufacturer Veneto Vetro), a PVB layer 1.52 mm thick and a toughened glass having thickness of 8 mm named PYRAN S (manufacturer Schott). A ceramic fibre gasket having thickness of 2 mm, is fitted between the glass faces and edges, the steel frame and glass retaining frame. Between the glass edge and the frame, on lower side, spacers of calcium silicate having thickness of 5 mm, are fitted.
The window may also be produced by Naval Suppliers Srl - Zona Industriale 24 - 33049 San Pietro al Natisone (UD) - Italy.

Field of application
Fire resistant A-0 Class window with fire hazard in the inner side of the application (side fitted with pane having thickness of 6 mm).
In case of installation on ships classified by RINA, the window shall comply to the additional requirements in accordance with RINA Rules.

Reference documents
HET ANKER drawing No. FTW-A0-SQ10C2018-R1 (2 sheets) dated 3 October 2012 approved on 22 October 2012 with endorsement No. LABS-721.
Tests carried out
Test as per RINA Test Laboratory Reports No. 2012CS01954 dated 4 april 2012 and No. 2009CS014733 dated 19 November 2009 issued according to IMO res. A. 754(18) A.I.




ATTACHMENT TO
CERTIFICATE No. MED497821CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****