MED511525CS!020ENG- -  -  N- B0 WALL FOR METAL BATHROOM WITH PIPE PENETRATION -N- S- S- -11/02/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/020- N-Dec 2, 20302370495
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/020 - (ENG)
Certificate date 11/02/2026
Type Protezione antincendio
Product Penetrations through "B" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Item Nº MED/3.27b

Model or Denomin.
Items
B0 WALL FOR METAL BATHROOM WITH PIPE PENETRATION
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Res. MSC.1/Circ.1655.,SOLAS 74 Reg. II-2/9
Expire date 02/12/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/020

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.27b
Description Penetrations through "B" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Type B0 WALL FOR METAL BATHROOM WITH PIPE PENETRATION
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Res. MSC.1/Circ.1655.; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
February 11, 2026
December 2, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/020
Page 1 of 2

Product description



B-0 Class bulkhead having maximum total height 2410 mm, certified by RINA with EC Type Examination Certificate No. MED5115CS/022, on the lower side, with a C shaped profile, 2 mm thick and having height of 210 mm. The bulkhead may be fitted with the following transits:
  • Product named EVAC Art. 6559504 fixed, by means of 6 self-screwing screws 4.8x16 mm type, to a steel sheet, 1 mm thick and having dimensions of 1015x752 mm. This steel sheet is screwed to the bulkhead joints by means of 6 self-screwing screws 4.8x16 mm type. The product, that fill an hole in the bulkhead having dimensions of 200x300 mm, is composed of a steel sheet and a mineral wool layer and is fitted with five pipes, passing through, having diameter of 8 mm (three pipes), 12 mm (one pipe) and one pipe having diameter of 52 mm (side fitted with the mineral wool) and 50 mm. The grater pipe, fitted with an internal gasket, is equipped, on the side having diameter of 50 mm, with a sleeve and flexible pipe (Art. 1378392), fixed to the sleeve by means of metallic hose clamp; on the other side a stainless steel pipe, having diameter of 50 mm, is pressure fixed.
  • Penetration of copper pipe having minimum thickness of 1 mm and external diameter ranging from 15 mm up to 22 mm fixed to the bulkhead steel sheet by means of brass nuts, brass flanged nut and brass nipple from ½ ”, 3 mm thick, up to ¾” having thickness of 3.5 mm.
  • Penetration of multilayer pipe having external diameter ranging from 16 mm (maximum thickness of 2.25 mm) up to 20 mm (maximum thickness of 2.5 mm), fixed to the bulkhead steel sheet by means of brass flanged nut, brass nipple from ½”, 3 mm thick up to ¾” having thickness of 3.5 mm and plastic adapter fitted on both sides.
  • Penetration of brass pipe having thickness of 0.6 mm and external diameter of 32 mm fixed to the bulkhead steel sheet by means of brass nut, brass flange nut and brass nipple 1’’ ¼ having thickness of 3.5 mm.
  • Penetration of stainless steel pipe having thickness of 1 mm and external diameter of 50 mm. The penetration, positioned on the C shaped steel profile below the class B bulkhead is fitted with a screwed flange, 1.5 mm thick and having dimensions of 150x140 mm.

Field of application

Fire resistant B-0 Class bulkhead with pipe penetration for general application.
Reference documents

MARINE INTERIORS CABINS SPA drawings No. 24PC00408 Rev. 00 and No. 24PC00407 Rev. 00 dated 29 July 2021 approved on 3 November 2021 respectively with endorsement Nos. LABS-2292 and LABS-2293.
MARINE INTERIORS CABINS SPA drawings No. +24PC00408 Rev. 01 and No. 24PC00407 Rev. 01 dated 22 May 2024.

Tests carried out

Tests as per RINA Test Laboratory reports Nos. 2021CS013167/1 and 2021CS013167/2 issued on 3 November 2021 and No. 2024CS01208/3 and 2024CS01208/4 issued on 23 February 2024, according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/020
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****