MED800426WSENGD- -  -  N- JYBHK-60E -N- S- S- -22/10/2026- Marine Equipment- - SN- S- - N-  - 1,057,283B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED800426WS- N-Oct 21, 20311057283
 
Form
  Marine Equipment(TO)
Certification N. MED800426WS - (ENG)
Certificate date 22/10/2026
Type Mezzi di salvataggio
Product Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Item Nº MED/1.26a

Model or Denomin.
Items
JYBHK-60E
Applicant JIANGYINSHI BEIHAI LSA CO., LTD.
Place of requester 58# Baima Road, Yuecheng Town, Jiangyin City,Jiangsu Province, CHINA
Tel. N.,Fax, Email 0510-86593709,0510-86596869,tech@jybeihai.net
Directive (EU) 2026/1434
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1419.
Expire date 21/10/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED800426WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/1.26a
Description Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Type JYBHK-60E
Applicant JIANGYINSHI BEIHAI LSA CO., LTD.
58# Baima Road, Yuecheng Town, Jiangyin City,Jiangsu Province, CHINA
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1419.
Issued in SHANGHAI on
This Certificate is valid until
October 22, 2026
October 21, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED800426WS
Page 1 of 2

TECHNICAL DATA


Product Description:
- Safety Working Load, SWL = 60 kN
- The release mechanism is used for launching and recovering rescue boat in on-load/off-load condition.
- A hydrostatic release unit is provided for this release mechanism.
- The mechanism is in compliance with IMO Resolution.MSC.48(66) as amended by IMO Resolution MSC.320(89) and MSC.554(108).

REFERENCE DOCUMENTS

Technical Documents and Reports approved and filed by RINA listed on Approval drawings and letters No. SHST-67101 JYBHK-60E Release Mechanism (SHST/2026/1877/LEIGU).

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the release mechanism was tested under witness of


RINA as per Prototype Test Report dated on 21/10/2026.

NOTE
- Materials as stated on the approved drawing are to be delivered with maker's product certificates.




ATTACHMENT TO
CERTIFICATE No. MED800426WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****