Manufacturer
GURIT (UK) Ltd
Place of Manufacturer
St Cross Business Park
Newport, Isle of Wight, PO30 5WU
UNITED KINGDOMProduct description
Two-component epoxy-based adhesive for bonding metal elements.
Mass per area (g/m2) 830 ± 10%
Thickness (mm) 0.6 ± 10%
Field of application
As adhesive.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.
In case of use on surfaces and linings as specified in paragraph 3.2.1 of SOLAS 1974 Chapter II-2 Reg. 5, where the calorific value shall not exceed 45 MJ/m2 for the thickness used as required in paragraph 3.2.2, the use of the certified product must be evaluated.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2020CS013132 dated 9 October 2020 issued according to: