DIP032019RM!004BIL- -  -  N- PORTLIGHT Mod. ELLIPTICAL (200 x 400 and 200 x 500 mm) -N- S- S- -04/06/2019- Diporto- - NS- N- - N-  - 402,034BbisDiportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP032019RM/004- N-402034
 
Form
  Diporto(TO)
Certification N. DIP032019RM/004 - (BIL)
Certificate date 04/06/2019
Product BOCCAPORTELLI ED OBLO'

Model or Denomin.
Items
PORTLIGHT Mod. ELLIPTICAL (200 x 400 and 200 x 500 mm)
Applicant ALLU.FER. TEMPESTA S.R.L.
Place of requester VIA DIAZ, 5  %  04018 SEZZE (LT)  % ITALY
Tel. N.,Fax, Email 0039 0773 88180, 0039 0773 804410, info@allufertempesta.it
Directive 2013/53/EU
Standards Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione.
RCD II - D4 - (Modulo B - Componenti) BIL
Vuoto Querysave
CERTIFICATO DI ESAME UE DEL TIPO
EU TYPE EXAMINATION CERTIFICATEN. DIP032019RM/004
Si certifica, in qualità di organismo notificato (n° 0474), che il seguente componente destinato ad unita' da diporto e' conforme ai requisiti essenziali di sicurezza stabiliti dalla Direttiva 2013/53/UE.
We certify, as notified body (no. 0474), that the following component is in compliance with the essential safety requirements of Directive 2013/53/EU.

Descrizione BOCCAPORTELLI ED OBLO'
Description HATCHES AND PORTLIGHTS
Modello PORTLIGHT Mod. ELLIPTICAL (200 x 400 and 200 x 500 mm)
Model Type
Norme di riferimento Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione.
Reference standards European Directive 2013/53/EU - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines.
In base all'Allegato II della Direttiva 2013/53/UE, la presente certificazione (Modulo B), unitamente all'applicazione di uno dei moduli previsti dall' Art. 20 della Direttiva, consente al Fabbricante di apporre sul prodotto sopradescritto la seguente marcatura.
On the basis of Annex II of Directive 2013/53/EU, this Certificate (Module B), in conjunction with the application of one of the modules for assessment of conformity of production stated in Art. 20 of Directive, allows the Manufacturer to affix the following marking to the product described above.
_________________________________
RINA Services S.p.A.
  
Alberto Carmagnani
Rilasciato a  Genova   il  4  Giugno  2019
   .   
Issued in Genoa on June 4, 2019
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI ESAME UE DEL TIPO
EU TYPE EXAMINATION CERTIFICATE
DIP032019RM/004
Allegato - Pagina 1/1
Enclosure - Page 1/1

Documenti di riferimento





Reference documents

Documentazione tecnica esaminata in forma completa il 04/06/2019 e depositata presso la Direzione Generale del RINA (job n. 2019/RM/01/320).


Examination of technical documentation completed on 04/06/2019 and filed at RINA Head Office (job no. 2019/RM/01/320).

Materiale del pannello



Plate Materials


PMMA (Polimetilmetacrilato) o TG (Cristallo temprato)


PMMA (Poly-methyl-methacrylate) or TG (Tempered glass)

Condizioni di accettazione




Acceptance conditions

EN ISO 12216.
In area I, devono essere rispettate le condizioni previste al par. 6.3.1.4 riferite al "use of glass".

EN ISO 12216.
In area I, conditions foreseen at par. 6.3.1.4 "use of glass" are to be satisfied.

Campo di applicazione




Fields of application
Area I - IIb - III - IV - Unità a motore e a vela. Categoria di progettazione A, B, C, D.
(Gli oblo' devono essere provvisti di marcatura CE).

Area I - IIb - III - IV - Motor Craft and Sailing Craft - Design Category A, B, C, D.
(Portlights are to be provided with CE marking)


Il presente certificato aggiorna quello DIP169214CS/004 rilasciato il 25/06/2014.

This certificate updates the one n° DIP169214CS/004 issued on 25/06/2014.


 Genova 04 Giugno 2019 
 Genoa June 04th, 2019
**** NOTICE: This is NOT an official certificate ****