FAB305921WS!002ENG- -  -  N- Elbow, Tee, Cross, Cap, Reducer, material: Carbon steel, Austenitic stainless steel,(Duplex) stainless steel -N- S- S- -18/09/2023- Fabbricanti Approvati- - NN- N- - S-  - 188,255BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB305921WS/002- N-Sep 19, 2028188255
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB305921WS/002 - (ENG)
Certificate date 18/09/2023
Type Approvazione di fabbricanti di materiali
Product Fittings senza saldatura per tubolature

Model or Denomin.
Items
Elbow, Tee, Cross, Cap, Reducer,  material: Carbon  steel, Austenitic stainless steel,(Duplex) stainless steel
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 19/09/2028
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB305921WS/002
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless pipe fittings
Type Elbow, Tee, Cross, Cap, Reducer,  material: Carbon  steel, Austenitic stainless
steel,(Duplex) stainless steel

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until September 19, 2028
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB305921WS/002
Enclosure - Page 1 of 1
Elbow, Tee, Cross, Cap, Reducer,  material: Carbon  steel, Austenitic stainless steel,

APPROVAL CONDITIONS

Products: Tee, Cross, Elbow, Cap, Reducer
-Manufacturing process: Pipes fittings made from pipes with hot forming or cold drawing;


Steel type /grade 3)
Manufacturing method 1)
Max. outer
diameter [mm]
Wall thickness [mm]
Heat treatment condition 2)
C and C-Mn
HFS, CFS
426
2.0 - 15
N, NT
Austenitic stainless
HFS, CFS
325
2.0 - 15
SHT
Ferritic-austenitic (Duplex) stainless
HFS, CFS
325
2.0 - 15
SHT

Remarks:
1) CFS: Cold finished seamless (tees); HFS: Hot finished seamless (elbows, reducers)
2) N: Normalised; NT: Normalised and tempered; SHT: Solution Heat Treated (solution annealing)
3) Suitable pipe fittings shall be selected from the following recognized standards:
EN 10253, ASTM A234, ASTM A403, ASTM A420, ASTM A774, ASTM A815, ASTM A960, ASTM A961,
JIS B2312, JIS B2313 or JIS B2316



Additional approval conditions:
Including pipe fittings in austenitic stainless steel for approved low-temperature applications

Note: Raw material is to be provided by Approved manufacturer.

Survey conditions:
The pipes fittings are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

shanghai Sep. 19, 2023
**** NOTICE: This is NOT an official certificate ****