ENGGS23/10/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED125309SH/002
Certificate date 10/23/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi per la messa a mare dotati di paranchi e verricelli
Item Nº A.1/1.21
Model SAFC21
Identification 0939031
Manufacturer ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Place of production BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Place of requester BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Specified For H. AOLI0812
Surveyor Wei Bing Lin
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED125309SH/002

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall and winch (davits)
Model SAFC21
Identification 0939031
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
Reference standards For H. AOLI0812
    
Issued at Genoa 
on October 23, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED125309SH/002
Manufacturer:
ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Address
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
0939031
Technical documentation
Test report issued by RINA on 31st July, 2009 ( n.0939031) in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.

Drawing as followings:
  STRT-5534                 21KN SINGLE ARM LIFEBOAT/LIFERAFT LAUNCHING UNIT 215HX21

  Maximum lowering load: 21kn
  Hoisting load: 14kn.
  Minimum lowering load: 5.2kn
  Slewing load: 14kn
                                                               ATTACHMENT TO

                                                    CERTIFICATE No. MED125309SH/002
  Hoisting speed: ≥18m/min
  Lowering speed: 40~60m/min
  Slewing Radius: 4.2 meter
  Slewing angle of electric motor: ≤330 deg
  Slewing angle of accumulator:>110 deg
  Steel wire dimension: 18 x 19 + FC-16mm
  Hydraulic system working pressure: 14.5 Mpa

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****