Product description:
The EPC is the main control unit of the soot-regeneration system EP.
Module types:
| Gen2 (1) | Gen3 / S0144 (2) |
Control Units (EPC) covered | EPC.2.024V | EPC.3.024V |
EPC.2.230V | EPC.3.230V |
Power Supply Units (EPP) covered | EPP.2.400V.030 | EPP.3.400V.030 |
EPP.2.400V.050 | EPP.3.400V.050 |
| EPP.3.208V.030 |
| EPP.3.208V.050 |
Heaters (EPH) covered | EPH400V.020 | EPH400V.020 |
EPH400V.030 | EPH400V.030 |
EPH400V.040 | EPH400V.040 |
EPH400V.050 | EPH400V.050 |
EPH.2.400V.030 | EPH208V.020 |
EPH.2.400.050 (1) | EPH208V.030 |
| EPH208V.040 |
| EPH208V.050 |
Converter housing/mixing tube |
MCEI/EP (when combined with SCR, see VN cert.) | X | X |
MCE/EP (when DPF only) | X | X |
Auxiliaries |
Temperature sensor (TCE) | TCE090; TCE180 | TCB 201.1 and TCB 201.2 |
TCB201.1; TCB201.2 (1) | |
Sensor box | EPS2; EPS3 (1) | EPS3 |
Current measurement | CTD300 | CTD300 |
CTD600 | CTD600 |
Differential Pressure Sensor | PEA100 (4) | PEA100 |
PEA200 | PEA200 |
Operating devices | EPCD | EPCD |
TYPE APPROVAL CERTIFICATE
No. ELE285924XG
Enclosure - Page 2 of 2
EPC (Control Unit)
Software:
| Gen2 (1) | Gen3 / S0144 (2) |
PLC | EPC v213 | EP PLC3.1.x (5) |
EP PLC 2.2.x (1) | S0144 EP PLC 1.0.x (2) |
Visualization | EPC V200 | EP EPCD 3.0.x |
| EP RDI 2.1.x (1) | S0144 EP EPCD 1.0.x (2) |
Ratings:
- Power supply: 24 V DC or 230 V AC for EPC (400 V or 208 V AC for EPP)
- Power consumption EPH: 20/30/40/50 kW
- Ambient Temperature: 0°C ... +50°C
- Degree of protection: IP65
Documents:
Descriptions:
C.02240 v02.4.0 EN Störungsliste EP;
C.02399 v01.1.0 EN E-Power Control System Functional Description;
C.02400 v01.1.0 EN E-Power Safety Concept;
C.02401 v01.0.0 EN E-Power Functional Description;
C.02402 v01.1.0 EN E-Power IO List;
C.02403 v01.1.0 EN E-Power List of monitored signals;
Test Report:
Treo: 145-22 Environmental and EMC, dated 2022-06-28
Circuit diagrams/ Block diagram:
C.02237 v03.1.0 EN 03 PID Regeneration System e-power;
C.02404 v02.2.0.0 EN E-Power System Block Diagram;
EPC,V212,(EPH50kW);
Remarks:
- Each particular application and installation is to be specifically approved by the Society.
- The records of all changes are to be forwarded to RINA for evaluation and approval.
- All changes in software and hardware are to be recorded as long as the system is in use on board.