ENGGN11/11/2025
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED183825XT/001
Certificate date 11/11/25
Type Mezzi di salvataggio
Directive (EU) 2025/1533
Product Launching appliances using falls (davits)
Item Nº MED/1.21
Model GD BMA 20/48
Identification 108
Applicant GURDESAN GEMI MAK. SAN. VE TIC. A.S.
Place of requester DILOVASI ORGANIZE SANAYI BOLGESI, 4. KISIM, D-4016 SOK., NO.1  %  41455 Gebze/Kocaeli  % TÜRKIYE
Tel. N.,Fax, Email +90 262 724 8546, +90 262 724 8554, info@gurdesan.com.tr
Standards IMO Res. MSC.81 (70) as amended
Surveyor Özgür Cem Yılmaz
Responsible Office RINA Turkey Marine



UNIT VERIFICATION CONFORMITY (MODULE G)
CERTIFICATE No.  MED183825XT/001

This is to certify
that RINA Services S.p.A. did undertake the relevant conformity assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2025/1533.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type GD BMA 20/48
Identification 108
Applicant GURDESAN GEMI MAK. SAN. VE TIC. A.S.
DILOVASI ORGANIZE SANAYI BOLGESI, 4. KISIM, D-4016 SOK., NO.1
41455 Gebze/Kocaeli
TÜRKIYE
Testing standards IMO Res. MSC.81 (70) as amended
    
Issued in Istanbul 
on November 11, 2025

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community to affix the following symbol on the equipment above identified.
0474 /25
 

________________________________________
RINA Services S.p.A. - Özgür Yilmaz
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE No. MED183825XT/001

Verified components of the equipment (with serial number)
108
Technical documentation
Approved drawings: ISST/19179, ISMC/12453, ISMC/12454, ISEL/11053
Test reports issued, ( Ref. Nr. AB.25.60, AB.25.247, AB.25.097, AB.24.129-2, AB.24.129-1, AB.24.129-3,  AB.25.015, AB.25.017, AB.24.016, AB.24.129-6, AB.24.129-7) in accordance with Resolution MSC. 81(70) as amended and LSA Code.

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: up to 10°, List: up to 20°.
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Özgür Yilmaz
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****