REC694126WSENG- -  -  N- Metal material tests/WPS/Welder Qualification -N- S- S- -01/09/2026- Laboratory Recognition- - SN- N- - N-  - 0BbisLaboratory RecognitionNumero Pratica,Norma,Validità- REC694126WS- N-Aug 31, 20290
 
Form
  Laboratory Recognition(TO)
Statement REC694126WS - (ENG)
Certificate date 01/09/2026
Description
Laboratory Recognition
Product Laboratory

Model or Denomin.
Items
Metal material tests/WPS/Welder Qualification
Applicant QINGDAO FISTER TESTING SERVICE CO., LTD.
Place of requester A9-4 Southern Home, West Lanzhou Road, Jiaozhu City Qingdao (Shandong)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for Recognition of Test Laboratories
Expire date 31/08/2029
Responsible Office RINA China Marine
Statement of Laboratory Recognition ENG
Vuoto Querysave
S
STATEMENT OF RECOGNITION OF TEST LABORATORY
No. REC694126WS

Description Laboratory Recognition
Type Metal material tests/WPS/Welder Qualification
Applicant QINGDAO FISTER TESTING SERVICE CO., LTD.
A9-4 Southern Home, West Lanzhou Road, Jiaozhu City Qingdao (Shandong)
CHINA
Reference standards RINA Rules for Recognition of Test Laboratories
  

 
 
   .   This Certificate is valid until August 31, 2029
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

STATEMENT OF RECOGNITION OF TEST LABORATORY
No. REC694126WS
Enclosure - Page 1 of 1
Metal material tests/WPS/Welder Qualification
LIST OF TESTS
PRODUCT
TEST
STANDARD
Plate, Section and Bar
Chemical analysis, Mechanical properties,Physical properties,Corrosion resistance and etc.
GB/T 228.1
Metallic materials—Tensile testing—Part 1: Method of test at room temperature
GB/T 228.2
Metallic materials-Tensile Testing-Part 2:Method of test at elevated temperature
GB/T 232
Metallic materials–Bend test
GB/T 229
Metallic materials – Charpy pendulum impact test method
GB/T 5313
Steel plate with through-thickness properties
GB/T 230.1
Metallic materials - Rockwell hardness test - Part 1: Test method
GB/T 231.1
Metallic Materials –Brinell hardness test - Part 1:Test method
GB/T 4340.1
Metallic materials - Vickers hardness test - Part 1: Test method
GB/T 2650
Destructive tests on welds in metallic materials—Impact tests
GB/T 2651
Destructive tests on welds in metallic materials-Transverse tensile test
GB/T 2652
Destructive tests on welds in metallic materials—Longitudinal tensile test on weld metal in fusion welded joints
GB/T 2653
Bend test methods on welded joints
GB/T 2654
Hardness Test Method on Welded Joints
GB/T 246
Metallic materials—Tube—Flattening test
GB/T 6396
Clad steel plates一Mechanical and technological test
GB/T 4336
Carbon and low-alloy steel---Determination of multi-element contents---Spark discharge atomic emission spectrometric method(routine method)
GB/T 11170
Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method)
GB/T 9441
Metallographic test method for spheroidal graphite cast iron
GB/T 224
Determination of the depth of decarburization of steels
GB/T 226
Test method for macrostructure and defect of steel by etching
GB/T 4334
Corrosion of metals and alloys-Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 6394
Determination of estimating the average grain size of metal
GB/T 7216
Metallographic test for grey cast iron
GB/T 10561
Determination of content of nonmetallic inclusions in steel—Micrographic method using standard diagrams
GB/T 13298
Inspection methods of microstructure for metals
GB/T 13299
Determination of free cementite, pearlite and Widmanstaten structure in steel
GB/T 13305
Method for determining content of the α-phase in stainless steels
GB/T 1979
Evaluation of macrostructural defects in structural steels—Acid etching method and ultrasonic testing method
GB/T 242
Metal materials-Tube - Drift-expending test
GB/T 14979
Eutectic carbide of steel--Micrographic method using standard diagrams
EN ISO 4136
Destructive tests on welds in metallic materials - Transverse tensile test
EN ISO 5173
Destructive tests on welds in metallic materials - Bend test
EN ISO 17639
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN ISO 9015-1
Destructive tests on welds in metallic materials - Hardness Testing Part 1: Hardness test on arc welded joints
EN ISO 9016
Destructive tests on welds in metallic materials - Impact tests-Test specimen location, notch orientation and examination
Note: In case the laboratory is located in test rooms and/or production facilities belonging to the product's Manufacturer, the acceptance of test reports issued by this laboratory is subject to the attendance of the RINA Surveyor to the performance of the test.
General conditions for the approval
a) The initial conditions verified by RINA at the time of the assessment are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with RINA Rules and /or other applicable Rules
f) Various test of metal material,Chemical analysis,Mechanical properties, Physical properties,Corrosion resistance and etc., ref. to the lab's accredited
testing scope of CMA.

RINA China Marine September 1, 2026
**** NOTICE: This is NOT an official certificate ****