FAB462826WSENG- -  -  N- carbon and carbon-manganese steel -N- S- S- -27/08/2026- Fabbricanti Approvati- - SN- N- - S-  - 659,297BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB462826WS- N-Sep 28, 2031659297
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB462826WS - (ENG)
Certificate date 27/08/2026
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio senza saldatura

Model or Denomin.
Items
carbon and carbon-manganese steel
Applicant JIANGSU XINCHANGJIANG SEAMLESS STEEL TUBE MANUFACTURING CO., LTD.
Place of requester No.375 Zhencheng Road Jiangyin (Jiangsu)  % CHINA
Tel. N.,Fax, Email 13771261818, ---, 375410657TY@SINA.COM
Standards RINA Rules for the approval of manufacturers of materials
Expire date 28/09/2031
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB462826WS
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless steel pipes and tubes
Type carbon and carbon-manganese steel
Applicant JIANGSU XINCHANGJIANG SEAMLESS STEEL TUBE MANUFACTURING CO., LTD.
No.375 Zhencheng Road Jiangyin (Jiangsu)
CHINA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until September 28, 2031
_________________________________
RINA Services S.p.A.
Qiangfu Tan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB462826WS
Enclosure - Page 1 of 1
carbon and carbon-manganese steel

APPROVAL CONDITIONS



Steel type: Carbon and carbon-manganese

Dimension: Maximum wall thickness 36mm (Approval for diameter up to and including 377mm )
Maximum wall thickness 20mm (Approval for diameter above 377mm and up to 630mm)

Survey conditions:
The pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine August 27, 2026
**** NOTICE: This is NOT an official certificate ****