MED094723CS!002ENGD- -  -  N- B15 WALL WET UNIT -N- S- S- -27/06/2023- Marine Equipment- - SN- S- - N-  - 290,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED094723CS/002- N-Jun 26, 2028290487
 
Form
  Marine Equipment(TO)
Certification N. MED094723CS/002 - (ENG)
Certificate date 27/06/2023
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b

Model or Denomin.
Items
B15 WALL WET UNIT
Applicant MARINE INTERIORS CABINS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 10/05/2023
Expire date 26/06/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED094723CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.11b
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B15 WALL WET UNIT
Applicant MARINE INTERIORS CABINS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
June 27, 2023
June 26, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED094723CS/002
Page 1 of 2

Product description

Bulkhead having maximum dimensions of 2420 (W) x 2205 (H) mm and thickness of 43 mm composed of panels having maximum dimensions of 600 (W) mm x 1995 (H) mm. The bulkhead is fitted, in the bottom, with a C shaped steel profile, 1.5 mm thick and having dimensions of 2386 (W) mm x 250 (H) mm, provided with three holes having diameter of 120 mm and pitch 560 mm. The panels and the C shaped profile are insulated with two layers of mineral wool with glass fiber cloth type Paroc Fire Slab D180 + GF (25 mm thick and having density of 180 kg/m3) and Paroc Fire Slab D220 + GF (15 mm thick and having density of 220 kg/m3) fixed together by means of steel pins having pitch ranging from 240 up to 360 mm. The panel metal joints, fitted on the mineral wool layer having thickness of 25 mm and in a way to expose one flange, consist of C shaped steel profiles, 1 mm thick, welded together by means of tack welds (pitch 300 mm), in a way to form an H shaped profile having two different flanges, the outer one 62 mm wide and the inner one 26 mm. The panel joints are screwed, on the top and on the bottom, to L shaped steel profiles, 1 mm thick and having dimensions of 16 x 21 mm. The L profile fitted on the bottom is screwed to the C steel profile. The bulkhead is enclosed within outer C shaped steel profiles, having thickness of 2 mm, screwed, on the bottom on the side exposed to the fire, to the C steel profile.
Field of application
Fire resisting B-15 Class bulkhead with fire hazard on the side without metal joints.
The bulkhead is to be installed with the untested side adjacent to the untested side of another B Class bulkhead ensuring that the level of protection indicated in the relevant fire integrity tables included in SOLAS Chapter II-2/Reg. 9.2 Thermal and Structural Boundaries is always fulfilled.
Reference documents
Santarossa SpA drawing No. 24PC00159 dated 2 April 2008 (4 sheets) enclosed to ZAG Test Laboratory report No. P0548/08-530-2 dated 16 July 2008.
Tests carried out
Tests as per ZAG Test Laboratory report No. P0548/08-530-2 issued on 16 July 2008 according to Resolution IMO A.754(18).




ATTACHMENT TO
CERTIFICATE No. MED094723CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****