Documenti di riferimento / Reference documents
- Documentazione tecnica archiviata con pratica n. RS/2025/CS/01/6011.
- Technical documentation filed with job n. RS/2025/CS/01/6011.
- Disegni approvati con n.ri DIP/124450, DIP/124451, DIP/124452, DIP/124453, DIP/146928 e DIP/146929.
- Technical documentation approved with drawing DIP/124450, DIP/124451, DIP/124452, DIP/124453, DIP/146928 e DIP/146929.
Caratteristiche tecniche / Technical characteristics
- Portelli stagni in AISI 316 con telaio in alluminio 5083, AH 36 e acciaio AISI 316: dimensioni 382x450 mm e 800x1400 mm.
- Portelli stagni in AH 36 con telaio in alluminio 5083, AH 36 e acciaio AISI 316: dimensioni 382x450 mm e 800x1400 mm.
- Portelli stagni in alluminio 5083 con telaio in alluminio 5083, AH 36 e acciaio AISI 316: dimensioni 382x450 mm e 800x1400 mm.
- Se vengono impiegati gli stessi materiali, come da disegni approvati, l'omologazione può essere considerata valida per tutte le dimensioni così descritte: lato corto compreso tra 382 e 800 mm e lato lungo compreso tra 450 e 1400 mm.
- Watertight hatches of AISI 316 with frame of alluminium 5083, AH 36 and steel AISI 316: dimensions 382x450 mm and 800x1400 mm.
- Watertight hatches of AH 36 with frame of alluminium 5083, AH 36 and steel AISI 316: dimensions 382x450 mm and 800x1400 mm.
- Watertight hatches of alluminium 5083 with frame of alluminium 5083, AH 36 and steel AISI 316: dimensions 382x450 mm and 800x1400 mm.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 382 and 800 mm and long side between 450 and 1400 mm.
Campi di applicazione / Fields of applications
- Portelli stagni a battente per "RINA Rules for the Classification of Yachts".
- Watertight hatches for "RINA Rules for the Classification of Yachts".
Condizioni di installazione / Acceptance Conditions
- Dopo l'installazione a bordo, deve essere eseguita prova di spingardatura.
- L'omologazione è riferita alla sola "tenuta stagna a battente".
- Portelli idonei per un battente di pressione idraulica pari a 3 m.
- Portelli installati su percorsi di sfuggita dovranno essere apribili da entrambi i lati (le maniglie dovranno esser permanentemente fissate).
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Hatches suitable for an hydraulic pressure of 3 m head.
- Hatches fitted on escape ways are to be openable by both sides (handles are to be permanently fixed).