MED384824WS!002ENGD- -  -  N- DXSQ12-40, DXSQ12-50, DXSQ12-65, DXSQ16-40, DXSQ16-50, DXSQ16-65, DXSQ19-40, DXSQ19-50, DXSQ19-65 -N- S- S- -21/07/2025- Marine Equipment- - SN- S- - N-  - 1,057,196B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED384824WS/002- N-Sep 22, 20291057196
 
Form
  Marine Equipment(TO)
Certification N. MED384824WS/002 - (ENG)
Certificate date 21/07/2025
Type Protezione antincendio
Product Dual-purpose type nozzles (spray/jet type): (a) Hand-held branch pipes for fire service use - Combination branch pipes PN 16
Item Nº MED/3.55a

Model or Denomin.
Items
DXSQ12-40, DXSQ12-50, DXSQ12-65, DXSQ16-40, DXSQ16-50, DXSQ16-65, DXSQ19-40, DXSQ19-50, DXSQ19-65
Applicant JIANGSU DINGXIANG MARINE EQUIPMENT CO., LTD.
Place of requester NO.77 XINJIAO ROAD, XINJIE TOWN % DONGTAI CITY, JIANGSU PROVINCE % CHINA
Tel. N.,Fax, Email 0515-85752008, 0515-85751100, info@dx-marine.com
Directive (EU) 2024/1975
Standards EN 15182-1:2019, EN 15182-2:2019.
Reference Documents SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 2024/06/08
Expire date 22/09/2029
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED384824WS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.55a
Description Dual-purpose type nozzles (spray/jet type): (a) Hand-held branch pipes for fire service use - Combination branch pipes PN 16
Type DXSQ12-40, DXSQ12-50, DXSQ12-65, DXSQ16-40, DXSQ16-50, DXSQ16-65, DXSQ19-40, DXSQ19-50, DXSQ19-65
Applicant JIANGSU DINGXIANG MARINE EQUIPMENT CO., LTD.
NO.77 XINJIAO ROAD, XINJIE TOWN,DONGTAI CITY, JIANGSU PROVINCE,CHINA
Testing standards EN 15182-1:2019, EN 15182-2:2019.
Reference standards SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in SHANGHAI on
This Certificate is valid until
July 21, 2025
September 22, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED384824WS/002
Page 1 of 3

Product Description

Dual-purpose Spray/Jet Nozzles (Type: DXSQ12, DXSQ16, DXSQ19) for discharging water from the ship’s fire main by using fire hoses.
Normal Type
DXSQ12
DXSQ16
DXSQ19
Nozzle Diameter (mm)
12
16
19
Working Pressure (bar)
6
6
6
Nominal Diameter (mm)
40
50
65
40
50
65
40
50
65
Flow Rate at Straight Jet (*)
(@6 bar) (L/min)
211
361
375
220
377
380
225
380
440
Effective Throw
(@6 bar) (m) (*)
30
32
33
30
32
33
30
32
35
Min.Spray Angle
0°
Max. Spray Angle (6 bar) (*)
127°
141°
150°
128°
142°
151°
129°
143°
152°
Mass (Kg) (*)
0.787
1.04
1.065
0.788
1.038
1.069
0.786
1.033
1.05

The nozzles can be connected with lengthened connector (made of Brass or Nylon **) as optional.
With Lengthened Connector
DXSQ12
DXSQ16
DXSQ19
Nozzle Diameter (mm)
12
16
19
Working Pressure (bar)
6
6
6
Nominal Diameter (mm)
40
50
65
40
50
65
40
50
65
Flow Rate at Straight Jet (*)
(@6 bar) (L/min)
210
359
371
218
374
375
222
375
431
Effective Throw
(@6 bar) (m) (*)
29.5
31.5
32
30
31.5
32
29.5
31.5
35
Min.Spray Angle
0°
Max. Spray Angle (6 bar) (*)
127°
141°
150°
128°
142°
151°
129°
143°
152°
Mass (Kg) (*)
(Brass/Nylon/
Brass with Nylon Handle)
1.189
/0.907
/2.434
1.545
/1.182
/2.437
1.695
/1.267
/2.672
1.19
/0.908
/2.435
1.543
/1.18
/2.435
1.699
/1.271
/2.676
1.188
/0.906
/2.433
1.538
/1.175
/2.43
1.68
/1.252
/2.657

Note: *: Data from Test Report **: The Brass type can be equipped with Nylon Handle as required by the buyer.


ATTACHMENT TO
CERTIFICATE No. MED384824WS/002
Page 2 of 3

Continued:

Field of Application

Dual-purpose type nozzles (Spray/Jet type) to be used in conjunction with hoses for fire fighting purposes on board ships.

The dual-purpose type nozzle may be equipped with fixed couplings as well, if the operability of the nozzle is not impaired.

Each product is to be delivered with its manual for use and maintenance handbook according to EN 15182-1 Ch. 8.1.


Reference Documents

- Bill of Material, filed by RINA with No.: SHFP-SHFP-32105;
- Technical Standard, filed by RINA with No.: SHFP-32529;
- User Manual, filed by RINA with No.: SHFP-32108;
- Marking, filed by RINA with No.: SHFP-28414;
- Technical Drawings, approved by RINA with No.: SHFP-32109.

Tests Carried Out

Test Report in compliance with EN 15182-1:2019 & EN 15182-2:2019 and witnessed by RINA Surveyor,
- Ref No.: 2025052701,filed by RINA with No.: SHFP-32621.

Remark

The product is to be marked according to EN 15182-1:2019 Ch. 8.2 and in addition with the MED Mark of Conformity, Notified Body No. and the year of manufacturing.

For Jet spray angles and adjustment positions, also to be clearly marked.

Each branchpipe shall be delivered with an instruction and maintenance handbook, according to Ch. 8.1.2 & 8.1.3 of EN 15182-1:2019.


Note

This certificate annuls and replaces the certificate No. MED384824WS/001 due to the product is updated as below,
- Add Nylon Nozzle Lengthened Connector.

- Add Nozzle Lengthened Connector with Handle.




ATTACHMENT TO
CERTIFICATE No. MED384824WS/002
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****