MED069326X3!001ENGB- -  -  N- HIGH EXPANSION SYNTHETIC FLUORINE FREE FOAM - 1%, 2%, 3% -N- S- S- -23/07/2026- Marine Equipment- - SN- S- - N-  - 1,230,593B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED069326X3/001- N-Jul 23, 20311230593
 
Form
  Marine Equipment(TO)
MED069326X3/001
Certification N. MED069326X3/001 - (ENG)
Certificate date 23/07/2026
Type Protezione antincendio
Product Concentrate for fixed high expansion foam fire extinguishing systems for machinery spaces and cargo pump rooms
Item Nº MED/3.47

Model or Denomin.
Items
HIGH EXPANSION SYNTHETIC FLUORINE FREE FOAM - 1%, 2%, 3%
GX-FUOCO
Applicant PT GLOBALSAFE PERKASA INDONESIA
Place of requester JLN. BANDUNG, BLOK II-B.1 KAV NO.13B KELURAHAN CILINCING - KECAMATAN CILINCING, JAKARTA 14150 % INDONESIA
Tel. N.,Fax, Email +62 21 4391 0429 . +62 8111156222 .
info@globalsafeperka.com
Directive (EU) 2025/1533
Standards IMO MSC/Circ.670
Reference Documents SOLAS 74 Reg.II-2/10, IMO Res.MSC.98(73)-(FSS Code) 6, IMO Res. MSC.391(95)-(IGF Code) 11
Request 2026-03-13
Expire date 23/07/2031
Responsible Office RINA Singapore Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jan-Paul De Wilde S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED069326X3/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.47
Description Concentrate for fixed high expansion foam fire extinguishing systems for machinery spaces and cargo pump rooms
Type HIGH EXPANSION SYNTHETIC FLUORINE FREE FOAM - 1%, 2%, 3%
GX-FUOCO
Applicant PT GLOBALSAFE PERKASA INDONESIA
JLN. BANDUNG,BLOK II-B.1 KAV NO.13B KELURAHAN CILINCING - KECAMATAN CILINCING,JAKARTA 14150,INDONESIA
Testing standards IMO MSC/Circ.670
Reference standards SOLAS 74 Reg.II-2/10. IMO Res.MSC.98(73)-(FSS Code) 6
Issued in RINA Singapore Marine on
This Certificate is valid until
July 24, 2026
July 23, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Jan-Paul De Wilde
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED069326X3/001
Page 1 of 3

Technical Characteristics


DESIGNATION
CONC.
EXPANSION
RATIO
VISCOSITY
(mm²/s)
PH
DENSITY
(g/cm³)
DRAINAGE
TIME (25%/50%)
FIRE RATING
GX-FUOCO
High Expansion Synthetic Fluorine Free Foam
1%
595
4.23
8.82
1.04
3min05s
5min25s
Extinction time
< 2 min
2%
609
6.37
8.88
1.02
3min05s
5min05s
3%
625
4.49
8.58
1.01
3min01s
5min04s

Field of Application

This approval does not address the foam generating equipment, only the foam concentrate for fixed high expansion
foam fire extinguishing systems for extinguishing fires in machinery spaces and cargo pump rooms referred to in
SOLAS regulation II-2/10.


Tests Carried Out

The analysis product report and fire test report were witnessed by RINA and issued according to IMO MSC.1/Circ.670
- 'Guidelines for The Performance and Testing Criteria and Surveys of High-Expansion Foam Concentrates for Fixed
Fire-Extinguishing Systems'.

ATTACHMENT TO
CERTIFICATE No. MED069326X3/001
Page 2 of 3



Technical Documentation

- Technical Data Sheet reviewed and filed by RINA with Dwg. No. JKFP/868.

- Material Safety Data Sheet reviewed and filed by RINA with Dwg. No. JKFP/870.

- Analysis Product for High Expansion Foam reviewed and filed by RINA with Dwg. JKFP/867.

- Fire Test Report for High Expansion Foam reviewed and filed by RINA with Dwg. No. JKFP/869.

DESIGNATION
CONC
Dwg. No. JKFP/867
Dwg. No. JKFP/869
<Test for Product Analysis>
<Fire Test>
GX-FUOCO
HE-SFFF
1%
No. 6638 dated 22/05/2026
GSP/WSFT/1/HE dated 29/04/2026
2%
No. 6639 dated 22/05/2026
GSP/WSFT/2/HE dated 29/04/2026
3%
No. 6640 dated 22/05/2026
GSP/WSFT/3/HE dated 29/04/2026





ATTACHMENT TO
CERTIFICATE No. MED069326X3/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Jan-Paul De Wilde
**** NOTICE: This is NOT an official certificate ****