MED451525CS!005ENGD- -  -  N- SMART 3L (SMART-3L-1-00, SMART-3L-2-A-00, SMART-3L-2-E-00, SMART-3L-2-S\E-00) -N- S- S- -15/10/2025- Marine Equipment- - SN- S- Luigi Benedetti- N-  - 1,067,054Luigi BenedettiB2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED451525CS/005- N-May 25, 20271067054
 
Form
  Marine Equipment(TO)
Certification N. MED451525CS/005 - (ENG)
Certificate date 15/10/2025
Type Protezione antincendio
Product Low-location lighting systems (components only)
Item Nº MED/3.40

Model or Denomin.
Items
SMART 3L (SMART-3L-1-00, SMART-3L-2-A-00, SMART-3L-2-E-00, SMART-3L-2-S\E-00)
Applicant NACOS MARINE APSS S.R.L.
Place of requester VIA SAN SEBASTIANO, 16  %  12055 Diano D'Alba (CN)  % ITALY
Tel. N.,Fax, Email 0173 468468, 0173 468469, ---
Directive (EU) 2025/1533
Standards ISO 15370(2021), IMO Res A.752(18)
Reference Documents Reg II-2/13, IMO Res A.752(18), IMO Res.MSC 98(73)-(FSS Code) 11.
Expire date 25/05/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Chiara Boscolo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED451525CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.40
Description Low-location lighting systems (components only)
Type SMART 3L (SMART-3L-1-00, SMART-3L-2-A-00, SMART-3L-2-E-00, SMART-3L-2-S\E-00)
Applicant NACOS MARINE APSS S.R.L.
VIA SAN SEBASTIANO, 16,12055 Diano D'Alba (CN),ITALY
Testing standards ISO 15370(2021), IMO Res A.752(18)
Reference standards Reg II-2/13, IMO Res A.752(18), IMO Res.MSC 98(73)-(FSS Code) 11.
Issued in Genoa on
This Certificate is valid until
October 15, 2025
May 25, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED451525CS/005
Page 1 of 2
System description

Low-location lighting (LLL) electrically powered based on a sequence of modules that are made of point light
sources made of PCB and polymeric PCB package, aluminium profile and polymeric coverage.
Each module contains a circuit with green high intensity LED, as shown on LLL Technical and Installation manual and Low Location lighting technical specification issued by Wartsila Apss S.R.L.
Components:SMART-3L-1-00
Voltage : 6÷30 Vdc, Maximum power consumption: 2,5 mA at 24Vdc
EXIT Module:SMART-3L-2-E-00
Voltage : 6÷30 Vdc, Maximum power consumption: 80,9 mA at 24Vdc
ARROW Module:SMART-3L-2-A-00
Voltage : 6÷30 Vdc, Maximum power consumption: 22,9 mA at 24Vdc
STEP Module:SMART-3L-2-S\E-00
Voltage : 6÷30 Vdc, Maximum power consumption: 21,4 mA at 24Vdc
Field of application

Low location lighting system for passenger ship in compliance with ISO 15370(2021).

Reference document

- Architectural Drawings, issued by Wartsila APSS S.R.L and approved by RINA with n° CSST 14509;
- LLL Technical and Installation Manual, issued by Wartsila APSS S.R.L and approved by RINA with n° CSST 14515;
- Low Location light technical specification, issued by Wartsila APSS S.R.L and approved by RINA with n° CSST 14516;
- Test report 16A232F, issued by Teslab on 28/11/2016 and filed by RINA with n° CSST 14513;
- Test report 1144-QL16-r01 ver.0, issued by Qualilab on 14/11/2016 and filed by RINA with n° CSST 14514.
- Report Reference n° 222022E
- Report Reference n° 224089A
Remarks

The LLL system should function at all times for at least 60 min after its activation.
The system is to be capable of being manually activated by a single action from the continuously manned central control station.Spacing between the point sources shall be no greater than 200 mm.In all passenger cabins, a placard, also referred to as mimic sign, explaining the purpouse of the LLL system and the actions to be taken in case of reduced visibility due to smoke, shall be affixed to the inside of the cabin door.




ATTACHMENT TO
CERTIFICATE No. MED451525CS/005
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****