MED244723WS!003ENGD- -  -  N- JTW-ZD-1330, JTW-ZDF-1332, JTW-ZDF-1333,JTW-ZDF-1334Ex, JTW-ZD-1335 -N- S- S- -05/02/2024- Marine Equipment- - SN- S- - N-  - 159,161B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED244723WS/003- N-Feb 4, 2029159161
 
Form
  Marine Equipment(TO)
MED099823WS/003
Certification N. MED244723WS/003 - (ENG)
Certificate date 05/02/2024
Type Protezione antincendio
Product Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (c) Heat detectors - Point detectors
Item Nº MED/3.51c

Model or Denomin.
Items
JTW-ZD-1330, JTW-ZDF-1332, JTW-ZDF-1333,JTW-ZDF-1334Ex,  JTW-ZD-1335
Applicant JIAXING KEXUN ELECTRON CO., LTD.
Place of requester No.478,Xinnong Road,Gaozhao Subdistrict,Xiuzhou District, Jiaxing City, Zhejiang Province, CHINA
Tel. N.,Fax, Email 86-573-82713489, 86-573-82713403, shipsurvey@kexun.cn
Directive (EU) 2023/1667
Standards EN 54-5:2017 incl. A1:2018, IEC 60092-504:2016, IEC 60533:2015.
Reference Documents SOLAS 74 Reg. II-2/7, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO Res. MSC.98(73)-(FSS Code) 9, IMO Res. MSC.391(95)-(IGF Code) 11, IMO MSC.1/Circ.1242.
Expire date 04/02/2029
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
No. MED244723WS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.51c
Description Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (c) Heat detectors - Point detectors
Type JTW-ZD-1330, JTW-ZDF-1332, JTW-ZDF-1333; JTW-ZDF-1334Ex,  JTW-ZD-1335
Applicant JIAXING KEXUN ELECTRON CO., LTD.
No.478,Xinnong Road,Gaozhao Subdistrict,Xiuzhou District, Jiaxing City, Zhejiang Province, CHINA
Testing standards applied EN 54-5:2017 incl. A1:2018, IEC 60092-504:2016, IEC 60533:2015.
Regulations specified and reference documents SOLAS 74 Reg. II-2/7, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO Res. MSC.98(73)-(FSS Code) 9, IMO Res. MSC.391(95)-(IGF Code) 11, IMO MSC.1/Circ.1242.
Issued in SHANGHAI on
This Certificate is valid until
February 5, 2024
February 4, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
No.  MED244723WS/003
Page 1 of 3

Product Description

Addressable heat detector


Type:JTW- ZD- 1330, JTW- ZD- 1335(with audible alarm itself )
Rated Voltage:15-32VDC
Monitor current: ≤350uA
Alarm current: ≤3.5mA
Operating temperature: -40℃~70℃
Enclosure Protection class:IP44

conventional type heat detector
Type:JTW- ZDF- 1332, JTW- ZDF- 1333
Rated Voltage:8.5-32VDC
Monitor current: ≤120uA
Alarm current: ≤70mA
Operating temperature: -40℃~70℃
Enclosure Protection class:IP44

Explosion-proof type heat detector
Type:JTW- ZDF- 1334Ex
Rated Voltage:8.5-28VDC
Monitor current: ≤120uA
Alarm current: ≤93mA
Operating temperature: T5: -40℃~70℃, T6: -40℃~55℃,
Explosion-proof mark: Ex ia IIC T5/T6 Ga
Intrinsic Safety parameter: Um=250V, Ui=28V, Ii=93mA, Pi=0.65W, Ci=0.242nF, Li=0

Enclosure Protection class:Detector + K1360: IP 20; Detector + 1360 +FS-1(W.T. base): IP 44.









 



ATTACHMENT TO
CERTIFICATE No. MED244723WS/003
Page 2 of 3

Application
Fixed fire detection and fire alarm systems components, heat detectors for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces in marine and offshore field.
Design Assessment
The design assessment is based on SOLAS 74 Reg. II-2/7, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO Res. MSC.98(73)-(FSS Code) 9, IMO Res. MSC.391(95)-(IGF Code) 11, IMO MSC.1/Circ.1242.

System components installed in ships, as applicable, comply with IEC standards: IEC 60092-504:2016, IEC 60533:2015.



Tests Carried Out
Test reports: “Shanghai Institute of Quality Inspection and Technical Research.". Report No.: W02314100081E. "Shanghai Inspection and Testing Institute of Instruments and Automation System Co., Ltd." Report No.: A23-017-ZC, according to EN 54-5:2017 incl. A1:2018, IEC 60092-504:2016, IEC 60533:2015. Filed by RINA with drawing No. SHEL-17465, and SHEL-17493.

Inspection report (Date on 2024, February 1) edit by "JIAXING KEXUN ELECTRON CO., LTD. " and signed by RINA Surveyor. Filed by RINA with drawing SHEL-18036.
Reference Documents
Technical drawings and manuals approved and filed by RINA listed on Approval letter No.: SHEL/2024/23/ZHITA, SHEL/2024/27/ZHITA, SHEL/2024/60/ZHITA, SHEL/2024/66/ZHITA and SHEL/2024/108/ZHITA.




ATTACHMENT TO
No. MED244723WS/003
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****