FAB019524CFENG- -  -  N- Carbon and Carbon-Manganese Steel, Low alloy steel, Austenitic Stainless Steel, Austenitic- ferritic(Duplex) Stainless Steel  -N- S- S- -03/10/2024- Fabbricanti Approvati- - SN- N- - S-  - 1,235,086BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB019524CF- N-Sep 17, 20291235086
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB019524CF - (ENG)
Certificate date 03/10/2024
Type Approvazione di fabbricanti di materiali
Product Fusi in acciaio per valvole

Model or Denomin.
Items
Carbon and Carbon-Manganese Steel, Low alloy steel, Austenitic Stainless Steel, Austenitic- ferritic(Duplex) Stainless Steel
Applicant OSWAL INDUSTRIES LIMITED (FOUNDRY DIVISION)
Place of requester AT- BILESHWARPURA,P.O.CHHATRAL,TA-KALOL  %  382729 Gandhinagar (Gujarat-24)  % INDIA
Tel. N.,Fax, Email ---, ---, qa@oswalcasting.com
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 17/09/2029
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB019524CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel castings for valves
Type Carbon and Carbon-Manganese Steel, Low alloy steel, Austenitic Stainless Steel,
Austenitic- ferritic(Duplex) Stainless Steel

Applicant OSWAL INDUSTRIES LIMITED (FOUNDRY DIVISION)
AT- BILESHWARPURA,P.O.CHHATRAL,TA-KALOL
382729 Gandhinagar (Gujarat-24)
INDIA
Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents RINA Rules
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until September 17, 2029
_________________________________
RINA Services S.p.A.
Aswin Palliath
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB019524CF
Enclosure - Page 1 of 1
Carbon and Carbon-Manganese Steel, Low alloy steel, Austenitic Stainless Steel, Austenitic- ferritic(Duplex) Stainless Steel

APPROVAL CONDITIONS


Product Description: Carbon and carbon-manganese steel, Low alloy steel, Austenitic Stainless Steel, Austenitic-ferritic (Duplex) Stainless Steel

Casting Method: No bake sand moulding process

Casting Weight: Max. 3200 Kg

Delivery Condition: Unmachined Castings, Heat treatment as applicable.

Application:
The range of products include gate, globe, ball, check, butterfly, choke, control valves, nominal
bore ranging from 2" to 48" (50 to 1200 mm) and pressure rating from 150 Class to 2500 Class

Survey Conditions: all castings to be used for construction for ships classed with RINA are to be in compliance with requirements of the RINA rules and are to be tested accordingly.


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA India Marine October 03, 2024
**** NOTICE: This is NOT an official certificate ****